The Ecler DROP6i is a 2-way pendant speaker with a 6.5 inch woofer and 1 inch silk dome tweeter, hung on steel wires from high or open ceilings. It runs on 70V/100V lines with taps up to 60W or at 8 ohms at 75W RMS, and the housing is IP53 rated. It is used where there is no suspended ceiling, such as restaurants, cafés, retail, hotel atriums, warehouses converted to offices and gyms. Sold as a single unit in black.
6.5in + 1in
2-way
60W
Max 100V tap
135°
Conical coverage
5 m
Hanging cords
Features
2-way design: 6.5 inch woofer with 1 inch silk dome tweeter, 1.65 kHz crossover
70V/100V taps at 60W, 30W, 15W and 7.5W via rear rotary selector
8 ohm low-impedance setting, 75W RMS
IP53 rated, fibreglass reinforced ABS housing
Aluminium grille with bayonet fixing; grille and housing are paintable
Double Euroblock input/link connector
Two height-adjustable 5 m steel hanging wires included
Black finish (RAL 9005)
Specifications
| Frequency range | 70 Hz to 20 kHz (-10 dB) |
| Coverage | 135° conical |
| Power handling | 75W RMS, 300W peak (8 ohms) |
| Sensitivity | 90 dB (1W/1m) |
| Maximum SPL | 109 dB continuous, 115 dB peak |
| 70V/100V taps | 60W, 30W, 15W, 7.5W |
| Recommended amplifier | 150W RMS (8 ohm use) |
| Drivers | 6.5 in woofer, 1 in silk dome tweeter |
| Crossover | 1.65 kHz |
| Connection | Double Euroblock (input/link) |
| Environmental | IP53 |
| Dimensions (diameter x H) | 270 x 344 mm |
| Weight | 4.2 kg |
| Included | 2 x 5 m steel hanging wires, 2 x 3-pin Euroblock |
| Operating temperature | -20°C to 70°C |
| Colour | Black (RAL 9005) |





