A 5m weatherproof mains link built on Titanex H07RN-F 2.5mm² three core cable, taking a PCE 16A IP44 T-connect at one end to a Seetronic PowerTwist TR1 IP65 connector at the other. It is the standard interface cable for getting a 16A site or generator supply into a PowerTwist-terminated festoon, architectural or outdoor LED run. Assembled in Britain.
5m
Length · Mid-length link
2.5mm²
Conductor · 3 core H07RN-F
16A
Rating · PCE T-connect
IP44 / IP65
Protection · Per connector
Mixed IP ratingsThe two ends are not rated alike. The PCE T-connect end is IP44, the Seetronic PowerTwist TR1 end is IP65. Outdoors, the overall assembly is only as protected as its weakest connector, so keep the IP44 end out of standing water and direct spray, or protect it in an enclosure.
Features
5m length – enough reach to get from a distribution point to the head of a run without excess cable to dress
PCE 16A T-connect, IP44 rated
Seetronic PowerTwist TR1 IP65 connector
Titanex H07RN-F 2.5mm² three core tough rubber sheathed cable
2.5mm² conductors keep volt drop down over longer daisy-chained circuits
Rubber sheath stays flexible in cold weather and coils cleanly off a drum
Suits outdoor festoon, architectural and temporary event lighting circuits
Made in Britain
Specifications
| Length | 5m |
| Connector A | PCE 16A T-connect, IP44 |
| Connector B | Seetronic PowerTwist TR1, IP65 |
| Cable | Titanex H07RN-F, 2.5mm², 3 core |
| Country of origin | United Kingdom |
| Stock code | CABL1054 |





