Titanex H07RN-F 10mm² 3-core heavy-duty rubber cable on a 100m drum. Sized for 32A-63A single-phase mains feeds, the workhorse cable for powering distros, generator tails and high-current single-phase circuits at touring shows, festivals and outdoor events.
3 core
CONDUCTORS · L, N, E, 10mm²
~63A
CURRENT (in air) · single circuit
450 / 750V
VOLTAGE · U0/U rated
100m
DRUM LENGTH · single coil
Distro feed sizing10mm² H07RN-F is the standard CSA for 63A single-phase 230V drops to lighting and audio distros, typically terminated to IEC 60309 (CEEform) plugs. Always derate for ambient temperature and grouping in line with BS 7671 / IEC 60364-5-52 when run in bunches or covered.
Features
Class 5 fine-stranded copper conductors for repeated flexing
EPR (ethylene propylene rubber) insulation
Polychloroprene (CR) outer sheath, oil and abrasion resistant
UV stable for outdoor festival and event use
Suitable for direct laying on the ground without protection
Resistant to most oils, acids and chemicals
HAR-approved to EN 50525-2-21 / HD 22.4
Suitable for 32A and 63A CEEform terminations
Specifications
| Cable type | H07RN-F |
| Conductor cross-section | 10mm² |
| Number of cores | 3 (L + N + E) |
| Conductor class | Class 5 (fine wire), bare copper |
| Insulation | EPR rubber (EI4) |
| Sheath | Polychloroprene rubber (EM2) |
| Voltage rating | 450 / 750V (U0/U) |
| Test voltage | 2,500V |
| Temperature range (flexing) | -25°C to +60°C |
| Standards | EN 50525-2-21, HD 22.4 S4, VDE 0282-4 |
| Drum length | 100m |
| SKU | CABL658 |





