Crown DCi 8|300N DriveCore Install Network Amplifier 8x300W 2U

Product code: 192060

£3,593.00 inc VAT
£2,994.17 ex VAT

SKU: DCI8X300N-U-EKFX

11 in stock (more available subject to additional lead time)

11 available online
More available from supplier in 1–3 weeks
FREE delivery by WednesdayOrder by 3pm tomorrow
Click & Collect Tuesday ›Collect from us in Wembley
VisaMastercardAmerican ExpressApple PayGoogle PayPayPalPayPal Credit
1 Year Manufacturer Warranty Included

About this Product

Output: 100V line or low impedance.

The Crown DCi 8|300N is an eight-channel networked DriveCore Install amplifier rated at 8x 300W into 4 or 8 ohms, or on 70V or 100V lines without output transformers. It adds BLU link digital audio, HiQnet network control and onboard DSP. It suits multi-zone installs in hotels, large venues, stadiums, campuses and transport buildings.

8x 300W
4/8 ohm, 70V, 100V
BLU link
Digital audio
2U
Rack height
SoftwareNetwork monitoring and DSP set-up use HARMAN Audio Architect software over HiQnet.

Features

Eight channels, 8x 300W into 4 or 8 ohms, 70V or 100V
Direct drive of 70V and 100V lines, selectable per channel
Bridgeable channel pairs for 600W
BLU link digital audio plus balanced analogue inputs, with automatic failover to a backup input
DSP: LevelMAX limiters, input and output EQ, crossover, delay, matrix mixer and speaker line monitoring
HiQnet network monitoring and control over TCP/IP
Programmable GPIO for volume, preset recall and fault reporting
Power factor corrected universal power supply

Specifications

Crown DCi 8|300N DriveCore Install Network Amplifier 8x300W 2U specifications
Output power, all channels driven 2 ohm: 150W, 4 ohm: 300W, 8 ohm: 300W, 16 ohm: 150W, 70V: 300W, 100V: 300W
Bridged output 4 ohm: 300W, 8 ohm: 600W, 16 ohm: 600W, high impedance: 600W
Bridged load range 4 to 16 ohms; 140V or 200V lines
Frequency response 20 Hz to 20 kHz (±0.25 dB, 8 ohms)
THD 0.35% at full rated power
Damping factor >1000 (20 to 100 Hz)
Cooling Variable-speed fans, front to back
Fan noise 47 dBA SPL at 1 m maximum
Mains 100 to 240 V AC, 50/60 Hz, 15A IEC
Dimensions (W x H x D) 483 x 89 x 362 mm, 2U
Weight 10.66 kg

Full features

  • Analogue & Digital Inputs – With digital audio transport via HARMAN’s proprietary BLU-Link, plus balanced analogue inputs, DCi gives you a tremendous audio advantage – at a much lower cost. The priority input router allows you to specify a primary input, and if audio is lost the amp automatically switches to the other input.
  • Network Monitoring & Control – Better monitoring, control and audio manipulation with the HiQnet™ protocol that’s over standard TCP/IP. Remotely see how all networked DCi amplifiers are performing and control them as needed. In addition, this allows Audio Architect software and the Powered by Crown app to work with DCi amplifiers.
  • Programmable General Purpose Input/Output Ports – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to a master computer.
  • Digital Signal Processing – DSP capabilities include the following:

    • LevelMAX Limiters
    • Input/Output EQ
    • Crossover
    • Delay
    • Matrix Mixer
    • Speaker Line Monitoring
  • EN 54-16 Compliant for Life Safety Applications - Part 16 of the European Union’s (EU) EN 54 standard for fire detection and alarm systems has a specific requirement for voice alarms, which output messages in the form of a voice message rather than a traditional siren. This amplifier is certified as part of an EN 54-16 VACIE*, meeting the stringent requirements of a life safety system to serve the needs of hospitality, large venue and other markets.

Full specifications

Power

  • Output Power: Dual Mode - All Channels Driven
    • Channels:  8
    • 2Ω:  150W
    • 4Ω:  300W
    • 8Ω:  300W
    • 16Ω:  150W
    • 70Vrms:  300W
    • 100Vrms:  300W
  • Output Power: Bridge Mono Mode - All Channels Driven:
    • 4Ω:  300W
    • 8Ω:  600W
    • 16Ω:  600W
    • 140Vrms:  600W
    • 200Vrms:  600W

General

  • Output Channels:  8
  • Frequency Response (8Ω, 20Hz - 20kHz):  ±0.25dB
  • Total Harmonic Distortion (at full rated power, 20Hz - 20kHz):  0.35%
  • Damping Factor (20Hz to 100Hz):  >1000
  • Load Impedance (Stereo/Dual Mode):  2Ω - 16Ω; 70Vrms and 100Vrms
  • Load Impedance Bridge Mono:  4Ω - 16Ω; 140Vrms and 200Vrms
  • Cooling:  Continuously variable speed forced air, front to back airflow
  • Maximum Fan Noise (re dBA SPL @ 1M):  47
  • Required AC Mains (±10%):  100V-240V ~ 50/60Hz
  • Power Connector:  15A IEC
  • Dimensions (W x H x D):  483 mm x 89 mm x 362 mm (19 in x 3.5 in x 14.25 in)
  • Weight:  10.66 kg (23.5 lbs)

Product Reviews

No reviews yet — be the first to review this product.

Similar Products

Frequently Asked Questions

We’re a working touring and events production company founded in 2019 by sound engineers with many years of experience. 

We’re very selective about the products we sell. Everything we supply we use ourselves on our tours, events and productions. This means we can offer a level of buying advice and aftersales support that can’t be beaten.

We’re official dealers of brands such as Allen & Heath, Audio Technica and sE Electronics. We also stock other leading brands including Shure, Sennheiser, Martin Audio and Chauvet Professional.

We accept Visa, Mastercard, American Express, Apple Pay, Google Pay and Paypal. We also offer finance through Paypal Credit and Klarna.

Business Customers can choose to receive a Proforma Invoice on checkout to pay by bank transfer.

Yes. We run an AV production business and have AV Engineers on hand to provide advice and technical support during our operating hours.

The quickest way to contact us for advice and support is through WhatsApp or Email.

Many of our customers are trade/industry buyers and we have already factored this into our pricing. Trade discounts may be available for bulk quantities on some products.

We also offer quantity discounts on some products on our website.

You can order on our website for delivery to the UK (Including Northern Ireland), Isle of Man, Jersey, Guernsey and the Republic of Ireland.

We can ship many items to the EU and other countries worldwide. Our dealer agreements may prevent us sending some items to certain countries.

Please contact us for a quotation if you need something shipped to a country not offered at checkout.

Please see our Returns page for information on our returns policy and to start a return online.

Generally if you change your mind you can return your item for a full refund within 30 days of delivery (14 days for business customers) - as long as the product is unopened and unused.

If an item is faulty or damaged we will arrange collection free of charge and repair/replace it as quickly as possible.

Estimated delivery times are shown on the product page. For items in stock we aim to get your order to you within 1 - 2 working days.

Some items are ordered directly from the manufacturer. These may have longer lead times which will be estimated on the product page. Please contact us for a more accurate lead time.

Yes. We have a trade counter near Wembley Stadium, London. Many of our most popular items are stocked here for immediate collection.

Stock availability is shown on every product page and is updated in real time. Items not stocked at our Wembley branch can usually be collected next day.

We're currently not able to offer an installation service due to the rapid growth of Stage Supply.

We hope to be able to offer this service again in the future.

We use Royal Mail for smaller items, FedEx and Parcelforce for larger items and The Pallet Network for Pallet delivery items.

Tracking for your order is provided on dispatch.