Ecler AURA-8B150 Installation Amplifier 8x150W 100V

Product code: 215215

£1,082.00 inc VAT
£901.67 ex VAT

SKU: ECL0107

4 in stock

4 available online
FREE delivery by WednesdayOrder by 3pm tomorrow
Click & Collect Tuesday ›Collect from us in Wembley
VisaMastercardAmerican ExpressApple PayGoogle PayPayPalPayPal Credit
1 Year Manufacturer Warranty Included

About this Product

The Ecler AURA-8B150 is an eight-channel Class D installation amplifier rated at 8x 150W into 2, 4 or 8 ohms. A rear-panel switch sets each pair of channels to low impedance, 70V or 100V line, or bridge mode for 300W into 4 or 8 ohms, so one amplifier can run ceiling speaker lines and low-impedance loudspeakers together. It is a straightforward analogue amplifier with no DSP or network control, built for retail, hospitality, education, corporate and leisure installs.

8x 150W
2, 4 or 8 ohms
150W
Per channel at 100V
300W
Bridged, 4/8 ohms
1U
Rack height
Mains leadIEC C14 mains inlet. Ecler supplies EU and IEC power cords with UK, US and CN plug adapters; a standard UK IEC kettle lead also fits.

Features

Eight channels, 8x 150W into 2, 4 or 8 ohms, all channels driven
Output mode set per pair of channels on rear DIP switches: 2, 4 or 8 ohms, 70V, 100V or bridge
8 balanced analogue inputs on Euroblock
Per-input link to input 1, so one source can feed every channel
Front-panel volume knob per channel, lockable from the rear panel (VOL or BYPASS)
Euroblock connectors with anti-pull locking
Auto standby (-40 dB threshold, 90 seconds) with front-panel on/off
PFC power supply, 100 to 240V AC
Thermal, overload, short-circuit, DC and HF protection with anti-clip system
Rack or desktop installation, rack hardware and feet supplied

Specifications

Ecler AURA-8B150 Installation Amplifier 8x150W 100V specifications
Channels 8 analogue in, 8 amplified out
Output power, all channels driven (1% THD) 8 ohm: 150W, 4 ohm: 150W, 2 ohm: 150W, 100V/70V: 150W per channel
Bridged output 4 ohm: 300W, 8 ohm: 300W
Amplifier technology Class D
Voltage gain 34 dB
Input sensitivity 0 dBV (1 Vrms)
Input impedance 20 kohm, balanced
Maximum input level +18 dBV (+20.2 dBu)
Frequency response 15 Hz to 30 kHz (-3 dB, 1W)
THD+N <0.1% (1 kHz, 0.1W to full power)
Signal-to-noise ratio 94 dBA
Crosstalk >70 dB (1 kHz)
Input connectors 3-pin Euroblock, balanced, 3.5 mm pitch
Output connectors 4-pin Euroblock, 5.08 mm pitch
Mains 100 to 240V AC, 50/60 Hz, IEC C14 inlet, PFC >0.91
Efficiency 59%
Cooling 2 fans
Operating temperature -20 to 40°C
Dimensions (W x H x D) 484 x 44 x 411.6 mm, 1U rack
Weight 7.5 kg

Full features

  • 8 analogue audio inputs and 8x150WRMS @4Ω powered audio outputs.
  • Low (2, 4 and 8Ω) and high impedance (70/100V) compatibility via rear panel switch.
  • Supports dual or bridge mode (@4/8Ω).
  • Euroblock input and output connectors.
  • Euroblock connectors with anti-pulling locking system.
  • Link to input 1 available.
  • The front panel volume control knobs can be locked using the rear panel switches for added security.
  • High efficiency (Class D).
  • Auto Standby function.
  • Fan cooling.
  • Thermal protection.
  • Overload protection.
  • Anti-clip system.

Channels

  • Number of output channels: 8
  • Output connection type: 4-pin Euroblock.  Pitch: 5,08mm
  • Output configuration: 2Ω, 4Ω, 8Ω, 100V, 70V and 4/8Ω in Bridge Mode
  • Number of input channels: 8
  • Input connection type: 3-pin Euroblock, balanced, pitch 3,5mm
  • Input configuration: Input link to CH1 selector per input

Output Power - All Channels Driven @1Khz @Cf9Db @ 1%Thd

  • Max output power @ 8Ω: 150W
  • Max output power @ 4Ω: 150W
  • Max output power @ 2Ω: 150W
  • Max output power @ 4Ω bridge mode: 300W
  • Max output power @ 8Ω bridge mode: 300W
  • Max output power @ 100V: 150W
  • Max output power @ 70V: 150W

Output Power - Single Channel Driven @1Khz @Cf9Db @ 1%Thd

  • Max output power @ 8Ω: 150W
  • Max output power @ 4Ω: 150W
  • Max output power @ 2Ω: 150W
  • Max output power @ 4Ω bridge mode: 300W
  • Max output power @ 8Ω bridge mode: 300W
  • Max output power @ 100V: 150W
  • Max output power @ 70V: 150W

Signal

  • Voltage gain: 34dB
  • Input sensitivity: 0 dBV
    2,21 dBu
    1 Vrms
  • Input impedance: 20kΩ balanced
  • Max input level: +18dBV
    20,21 dBu
  • Frequency response: 15Hz - 30kHz (-3dB, 1W any load)
  • THD + Noise: <0,1%  ( @1kHz, from 0,1W to Full Power)
  • SNR: 94 dBA
  • Crosstalk: >70dB (@1kHz)
  • CMRR: >70 (from 20Hz to 20kHz)

Electrical

  • Power supply: Universal, regulated SMPS with PFC
  • AC mains requirement: 100-240V @ 50-60Hz (±10%)
  • Power factor correction: > 0,91
  • AC mains connector: IEC C14 inlet

Power & Heat @230Vac - 1/4 Power, @ 4Ω (All Channels Driven)

  • Power: 506W
    582VA
  • Current Draw: 2,53 Arms
  • Thermal Loss: 177,2 kcal/h
    703,1 BTU/h

Power & Heat @230Vac - 1/8 Power, @ 4Ω (All Channels Driven)

  • Power: 300W
    374 VA
  • Current Draw: 1,62 Arms
  • Thermal Loss: 129,0 kcal/h
    512,0 BTU/h

Power & Heat @230Vac - Idle

  • Power: 110W
    250 VA
  • Current Draw: 1,1 Arms
  • Thermal Loss: 94,6 kcal/h
    375,4 BTU/h

Power & Heat @230Vac - Standby/Sleep Mode

  • Power: 62,7 VA
  • Current Draw: 0,27 Arms
  • Thermal Loss: 2,3 kcal/h
    9,2 BTU/h

Power & Heat @120Vac - 1/4 Power, @ 4Ω (All Channels Driven)

  • Power: 828,5W
    844 VA
  • Current Draw: 7,50 Arms
  • Thermal Loss: 196,5 kcal/h
    779,8 BTU/h

Power & Heat @120Vac - 1/8 Power, @ 4Ω (All Channels Driven)

  • Power: 467,7W
    489 VA
  • Current Draw: 4,31 Arms
  • Thermal Loss: 152,01 kcal/h
    603,1 BTU/h

Power & Heat @120Vac - Idle

  • Power: 99,4W
    844 VA
  • Current Draw: 1,02 Arms
  • Thermal Loss: 85,5 kcal/h
    339,3 BTU/h

Power & Heat @120Vac - Standby/Sleep Mode

  • Power: 1,5W
    23,9 VA
  • Current Draw: 0,20 Arms
  • Thermal Loss: 1,3 kcal/h
    5,01 BTU/h

Technologies

  • Amplification technology: Class D
  • Energy saving: Auto standby function selectable
  • Efficiency: 59%
  • Cooling: 2 fans
  • Maximum fan noise: 57 dBA

Protections

  • AC protection: Yes
  • DC protection: Yes
  • HF protection: Yes
  • Short-circuit protection: Yes
  • Clip limiter: Yes
  • Thermal protection: Yes

Local Control

  • Attenuators: Front panel knobs per channel
    VOL (default)/BYPASS option
  • Output mode settings: Back panel Dipswitch by pairs of channels
    BRIDGE/2Ω/4Ω/8Ω/70V/100V
  • RUN/SLEEP mode: Auto standby function
    Front panel button
  • Power ON/OFF: Front panel switch

Settings

  • Attenuators: Front panel knobs per channel
  • Output settings: 2Ω/4Ω/8Ω/70V/100V/Bridge Mode output selection by pair of channels
  • Auto standby function: Front panel button
  • Auto standby threshold: -40dB
  • Auto standby time: 90 seconds
  • Power ON/OFF: Front panel switch

Monitoring

  • Signal Present: SIGNAL LED (Green) per channel
  • Cliping: CLIP LED (Red) per channel
  • Protect: TH/PROT LED (Red) per channel
  • Standby: AUTO STANDBY ON/OFF LED (Green) per unit
  • Standby / Mute: STANDBY (Orange) per channel
  • Limit: TH/PROT LED (Red)
  • Thermal: TH/PROT LED (Red) per channel
  • On: ON LED (Green) per unit
  • Link: LINK (White)

Physical

  • Operating temperature: -20⁰ to 40⁰ C
    -4⁰ to 104⁰ F
  • Operating humidity: 10-90% RH, non-condensing
  • Storage temperature: -40⁰ to 70⁰ C
    -40⁰ to 158⁰ F
  • Storage humidity: 10-95% RH, non-condensing
  • Installation options: Rack 19" installation & desktop
  • Included accessories: EU power cord, UK,US and CN power cord adapters, IEC Power Cord, x8 Euroblock 3-pin connectors (blue for Inputs), x4 Euroblock 4-pin connectors (green for Outputs), Rear Rack Kit, 3M rubber foot (4pcs)
  • Dimensions: 484 x 44 x 411.6mm / 19 x 1,73 x 16.20 in.  (WxHxD)
  • Weight: 7.5kg / 16.53 lb
  • Shipping dimensions: 590 x 80 x 590mm / 23.23 x 3.15 x 23.23 in.  (WxHxD)
  • Shipping weight: 11.15kg / 24.58 lb

Product Reviews

No reviews yet — be the first to review this product.

Similar Products

Frequently Asked Questions

We’re a working touring and events production company founded in 2019 by sound engineers with many years of experience. 

We’re very selective about the products we sell. Everything we supply we use ourselves on our tours, events and productions. This means we can offer a level of buying advice and aftersales support that can’t be beaten.

We’re official dealers of brands such as Allen & Heath, Audio Technica and sE Electronics. We also stock other leading brands including Shure, Sennheiser, Martin Audio and Chauvet Professional.

We accept Visa, Mastercard, American Express, Apple Pay, Google Pay and Paypal. We also offer finance through Paypal Credit and Klarna.

Business Customers can choose to receive a Proforma Invoice on checkout to pay by bank transfer.

Yes. We run an AV production business and have AV Engineers on hand to provide advice and technical support during our operating hours.

The quickest way to contact us for advice and support is through WhatsApp or Email.

Many of our customers are trade/industry buyers and we have already factored this into our pricing. Trade discounts may be available for bulk quantities on some products.

We also offer quantity discounts on some products on our website.

You can order on our website for delivery to the UK (Including Northern Ireland), Isle of Man, Jersey, Guernsey and the Republic of Ireland.

We can ship many items to the EU and other countries worldwide. Our dealer agreements may prevent us sending some items to certain countries.

Please contact us for a quotation if you need something shipped to a country not offered at checkout.

Please see our Returns page for information on our returns policy and to start a return online.

Generally if you change your mind you can return your item for a full refund within 30 days of delivery (14 days for business customers) - as long as the product is unopened and unused.

If an item is faulty or damaged we will arrange collection free of charge and repair/replace it as quickly as possible.

Estimated delivery times are shown on the product page. For items in stock we aim to get your order to you within 1 - 2 working days.

Some items are ordered directly from the manufacturer. These may have longer lead times which will be estimated on the product page. Please contact us for a more accurate lead time.

Yes. We have a trade counter near Wembley Stadium, London. Many of our most popular items are stocked here for immediate collection.

Stock availability is shown on every product page and is updated in real time. Items not stocked at our Wembley branch can usually be collected next day.

We're currently not able to offer an installation service due to the rapid growth of Stage Supply.

We hope to be able to offer this service again in the future.

We use Royal Mail for smaller items, FedEx and Parcelforce for larger items and The Pallet Network for Pallet delivery items.

Tracking for your order is provided on dispatch.