Ecler DARA-4B150 DSP Installation Amplifier 4x150W 100V

Product code: 215232

£1,002.00 inc VAT
£835.00 ex VAT

SKU: ECL0117

1 in stock

1 available online
FREE delivery by WednesdayOrder by 3pm tomorrow
Click & Collect Tuesday ›Collect from us in Wembley
VisaMastercardAmerican ExpressApple PayGoogle PayPayPalPayPal Credit
1 Year Manufacturer Warranty Included

About this Product

The Ecler DARA-4B150 is a four-channel Class D installation amplifier with built-in DSP and network control, rated at 4x 150W into 2, 4 or 8 ohms. Output mode is set per pair of channels for low impedance, 70V or 100V lines, or bridged for 300W into 4 or 8 ohms, and routing, EQ, speaker presets and limiters are set from a web browser. It suits multi-zone background music and voice systems in retail, hospitality, education, corporate, leisure and gym installs.

4x 150W
2, 4 or 8 ohms
150W
Per channel at 100V
300W
Bridged, 4/8 ohms
1U
Rack height
ControlConfiguration is through the embedded web application over Ethernet. End-user control is from Ecler PULSO touch panels or the PULSO app (Android/iOS).
Mains leadIEC C14 mains inlet. Ecler supplies EU and IEC power cords with UK, US and CN plug adapters; a standard UK IEC kettle lead also fits.

Features

Four channels, 4x 150W into 2, 4 or 8 ohms, all channels driven
Output mode set per pair of channels: 2, 4 or 8 ohms, 70V, 100V or bridge
4 balanced analogue inputs with an internal 4 x 4 digital matrix
DSP on inputs and outputs: delay, parametric and graphic EQ, compressor, FIR filters, RMS and peak limiters
40 speaker presets (22 Ecler, 18 custom) and 15 amplifier presets
Two Ethernet ports with built-in switch for daisy-chaining
Set up and monitored from the embedded web application
Remote control from Ecler PULSO panels and the PULSO mobile app
4 GPI inputs (0 to 10V) for remote volume, plus external mute contact
Auto standby, and a front panel that can be locked in software
Thermal, overload, short-circuit, DC and HF protection with clip limiter

Specifications

Ecler DARA-4B150 DSP Installation Amplifier 4x150W 100V specifications
Channels 4 analogue in, 4 amplified out
Output power, all channels driven (1% THD) 8 ohm: 150W, 4 ohm: 150W, 2 ohm: 150W, 100V/70V: 150W per channel
Bridged output 4 ohm: 300W, 8 ohm: 300W
Amplifier technology Class D
Voltage gain 30.8 dB
Input sensitivity 0 dBV (1 Vrms)
Input impedance 20 kohm, balanced
Maximum input level +23 dBu
Frequency response 15 Hz to 22 kHz (-3 dB, 1W)
THD+N <0.1% (1 kHz, 0.1W to full power)
Signal-to-noise ratio 95 dBA
Crosstalk >80 dB (1 kHz)
DSP 32-bit floating point, 24-bit / 48 kHz converters, 1.5 ms latency
Delay 20 ms per input, 300 ms per output
Control Embedded web application; 2x RJ-45, 100 Mb, daisy-chain
GPI 4x 0 to 10V, plus external mute contact
Input connectors 3-pin Euroblock, balanced, 3.5 mm pitch
Output connectors Euroblock, 5.08 mm pitch
Mains 100 to 240V AC, 50/60 Hz, IEC C14 inlet, PFC >0.92
Efficiency 70%
Auto standby Threshold -40 dB, 90 seconds
Cooling 3 fans, 57 dBA maximum
Operating temperature -20 to 40°C
Dimensions (W x H x D) 484 x 44 x 296.6 mm (263 mm deep excluding handles), 1U rack
Weight 4.95 kg

Full features

  • 4‑channel Class D power amplifier with high‑efficiency design.
  • 4 × 150W RMS @ 4Ω output power.
  • Supports 2Ω, 4Ω, 8Ω, 70V, 100V and Bridge mode (configurable by channel pairs).
  • 4 analogue balanced inputs with internal 4 × 4 digital matrix.
  • Integrated DSP for advanced audio processing and system optimization.
  • Ecler loudspeaker EQ presets included.
  • Dual Ethernet ports with integrated switch for network daisy‑chaining.
  • Remote control and configuration via PULSO Series (Android / iOS App).
  • Embedded web interface for setup, monitoring, and control.
  • Auto Standby function for energy savings.
  • Comprehensive protection systems (thermal, overload, short‑circuit, clip).
  • Safety Euroblock connections for secure wiring.
  • Software‑lockable front panel to prevent unauthorized access.

Channels

  • Number of output channels: 4
  • Output connection type: 2-pin Euroblock.  Pitch: 5,08mm
  • Output configuration: 2Ω, 4Ω, 8Ω, 100V, 70V and 4/8Ω in Bridge Mode
  • Number of input channels: 4
  • Input connection type: 3-pin Euroblock, balanced, pitch 3,5mm
  • Input configuration: Digital Matrix 4 In x 4 Out

Output Power - All Channels Driven @1Khz @Cf9Db @ 1%Thd

  • Max output power @ 8Ω: 150W
  • Max output power @ 4Ω: 150W
  • Max output power @ 2Ω: 150W
  • Max output power @ 4Ω bridge mode: 300W
  • Max output power @ 8Ω bridge mode: 300W
  • Max output power @ 100V: 150W
  • Max output power @ 70V: 150W

Output Power - Single Channel Driven @1Khz @Cf9Db @ 1%Thd

  • Max output power @ 8Ω: 150W
  • Max output power @ 4Ω: 150W
  • Max output power @ 2Ω: 150W
  • Max output power @ 4Ω bridge mode: 300W
  • Max output power @ 8Ω bridge mode: 300W
  • Max output power @ 100V: 150W
  • Max output power @ 70V: 150W

Signal

  • Voltage gain: 30.8dB
  • Input sensitivity: 0dBV
    2.21dBu
    1Vrms
  • Input impedance: 20k
  • Max input level: +23 dBu
  • Frequency response: 15Hz - 22kHz (-3dB, 1W any load)
  • THD + Noise: <0,1% ( @1kHz, from 0,1W to Full Power)
  • SNR: 95 dBA
  • Crosstalk: >80dB (1kHz)
  • CMRR: 62,2dB

Electrical

  • Power supply: Universal, regulated SMPS with PFC
  • AC mains requirement: 100-240V @ 50-60Hz (±10%)
  • Power factor correction: > 0,92
  • AC mains connector: IEC C14 inlet

Power & Heat @230Vac - 1/4 Power, @ 4Ω (All Channels Driven)

  • Power: 283,5W
    375 VA
  • Current Draw: 1,63 Arms
  • Thermal Loss: 114,8 kcal/h
    455,6 BTU/h

Power & Heat @230Vac - 1/8 Power, @ 4Ω (All Channels Driven)

  • Power: 173W
    252 VA
  • Current Draw: 1,07 Arms
  • Thermal Loss: 84,3 kcal/h
    334,5 BTU/h

Power & Heat @230Vac - Idle

  • Power: 52W
    94 VA
  • Current Draw: 0,78 Arms
  • Thermal Loss: 44,7 kcal/h
    177,5 BTU/h

Power & Heat @230Vac - Standby/Sleep Mode

  • Power: 5W
    60 VA
  • Current Draw: 0,27 Arms
  • Thermal Loss: 4,3 kcal/h
    17,1 BTU/h

Power & Heat @120Vac - 1/4 Power, @ 4Ω (All Channels Driven)

  • Power: 273,6W
    293 VA
  • Current Draw: 2,45 Arms
  • Thermal Loss: 106,3 kcal/h
    421,8 BTU/h

Power & Heat @120Vac - 1/8 Power, @ 4Ω (All Channels Driven)

  • Power: 158,9W
    176 VA
  • Current Draw: 1,47 Arms
  • Thermal Loss: 106,3 kcal/h
    421,8 BTU/h

Power & Heat @120Vac - Idle

  • Power: 51,3W
    88 VA
  • Current Draw: 0,82 Arms
  • Thermal Loss: 44,1 kcal/h
    175,1 BTU/h

Power & Heat @120Vac - Standby/Sleep Mode

  • Power: 4,3W
    22,7 VA
  • Current Draw: 0,19 Arms
  • Thermal Loss: 3,7 kcal/h
    14,7 BTU/h

Technologies

  • Amplification technology: Class D
  • Energy saving: Auto standby function selectable
  • Efficiency: 70%
  • Cooling: 3 fans
  • Maximum fan noise: 57 dBA

Dsp

  • AD converters: 24 Bit Tandem™ @ 48kHz
    115dB-A Dynamic Range -  0.0018% THD+N
  • DA converters: 24 Bit Tandem™ @ 48kHz
    120dB-A Dynamic Range -  0.0018% THD+N
  • Sample rate converter: 24 bits @ 48kHz
  • Internal precision: 32 bits floating point
  • Latency: 1,5 ms
  • Memory/Presets: 15 amplifiers presets
    40 Speakers presets (22 Ecler presets + 18 Custom presets)
  • Delay: 20 ms (input) + 300 ms (output) for time alignment
  • Equalizer: Custom FIR, Parametric IIR: Peaking, Low Shelf, High Shelf, AllPass 1st, AllPass 2nd, General Low, General High, Butterworth Low, Butterworth High, Bessel Low, Bessel High
  • Limiters: RMS and Peak voltage limiter
  • Digital processing: 32 bits
  • Inputs processing: Delay, Parametric and Graphic EQ, Compressor
  • Outputs processing: Delay, Parametric and Graphic EQ, Polarity, Compressor, FIR filters, RMS and Peak Limiter
  • Others: Presets management, Panels and Users, Internal matrix, Linking and Stereo options, Selectable Auto-standby,  Panel Operating Range, Knobs and GPI Matrix, Custom and Ecler speakers settings, Network Parameters, Finder, Remote control and configuration via PULSO Series (Android / iOS App)

Protections

  • AC protection: Yes
  • DC protection: Yes
  • HF protection: Yes
  • Short-circuit protection: Yes
  • Clip limiter: Yes
  • Thermal protection: Yes

Remote Control Connections

  • GPIs: x4 GPIs (0-10V)
  • External MUTE: Yes, contact

Local Control

  • Attenuators: Assignable front panel knobs
  • Output mode settings: Back panel Dipswitch by pairs of channels
    BRIDGE/2Ω/4Ω/8Ω/70V/100V
  • RUN/SLEEP mode: Auto standby function
    Forced standby
    (Settings by embedded web application)
  • Power ON/OFF: Front panel switch

Settings

  • Attenuators: Assignable front panel knobs
  • Output settings: 2Ω/4Ω/8Ω/70V/100V/Bridge Mode output selection by pair of channels
  • Auto standby function: Settings by embedded web application
  • Auto standby threshold: -40dB
  • Auto standby time: 90 seconds
  • Power ON/OFF: Front panel switch

Connectivity

  • Ethernet: Ethernet Base-Tx 100Mb  CAT5 up to 100m
    Secondary RJ-45 port for Daisy-Chaining
  • Programing and control: Embedded web application

Monitoring

  • Signal Present: SIGNAL LED (Green) per channel
  • Cliping: CLIP LED (Red) per channel
  • Protect: TH/PROT LED (Red) per channel
  • Standby: STANDBY (Orange) per channel
  • Mute: MUTE LED (White) per channel
  • Limit: TH/PROT LED (Red)
  • Thermal: TH/PROT LED (Red) per channel
  • Data: DATA LED (White) per unit
  • On: ON LED (Green) per unit

Digital Engine

  • Processor: 32 bits

Audio Converters

  • Sampling rate: 48kHz
  • Resolution: 24 bits
  • Dynamic range: 118dB

Physical

  • Operating temperature: -20⁰ to 40⁰ C
    -4⁰ to 104⁰ F
  • Operating humidity: 10-90% RH, non-condensing
  • Storage temperature: -40⁰ to 70⁰ C
    -40⁰ to 158⁰ F
  • Storage humidity: 10-95% RH, non-condensing
  • Installation options: Rack 19" installation & desktop
  • Included accessories: 1 x EU & IEC power cords, UK,US & CN plug adapters, 4x Desktop feet, 1x Rack 19" installation hardware, 1 x Remote Volume connector (GPI), 1 x External Mute connector, 6x Euroblock connectors (4x 3-pin blue for inputs and 2x 4-pin green for outputs), 2x Euroblock jumper.
  • Dimensions: 484 x 44 x 296.6mm / 19 x 1.73 x 11.67 in.  (WxHxD)
  • Weight: 4.95kg / 10.91 lb
  • Shipping dimensions: 590 x 80 x 474mm / 23.23 x 3.15 x 18.66 in.  (WxHxD)
  • Shipping weight: 7.60kg / 16.76 lb

Product Reviews

No reviews yet — be the first to review this product.

Similar Products

Frequently Asked Questions

We’re a working touring and events production company founded in 2019 by sound engineers with many years of experience. 

We’re very selective about the products we sell. Everything we supply we use ourselves on our tours, events and productions. This means we can offer a level of buying advice and aftersales support that can’t be beaten.

We’re official dealers of brands such as Allen & Heath, Audio Technica and sE Electronics. We also stock other leading brands including Shure, Sennheiser, Martin Audio and Chauvet Professional.

We accept Visa, Mastercard, American Express, Apple Pay, Google Pay and Paypal. We also offer finance through Paypal Credit and Klarna.

Business Customers can choose to receive a Proforma Invoice on checkout to pay by bank transfer.

Yes. We run an AV production business and have AV Engineers on hand to provide advice and technical support during our operating hours.

The quickest way to contact us for advice and support is through WhatsApp or Email.

Many of our customers are trade/industry buyers and we have already factored this into our pricing. Trade discounts may be available for bulk quantities on some products.

We also offer quantity discounts on some products on our website.

You can order on our website for delivery to the UK (Including Northern Ireland), Isle of Man, Jersey, Guernsey and the Republic of Ireland.

We can ship many items to the EU and other countries worldwide. Our dealer agreements may prevent us sending some items to certain countries.

Please contact us for a quotation if you need something shipped to a country not offered at checkout.

Please see our Returns page for information on our returns policy and to start a return online.

Generally if you change your mind you can return your item for a full refund within 30 days of delivery (14 days for business customers) - as long as the product is unopened and unused.

If an item is faulty or damaged we will arrange collection free of charge and repair/replace it as quickly as possible.

Estimated delivery times are shown on the product page. For items in stock we aim to get your order to you within 1 - 2 working days.

Some items are ordered directly from the manufacturer. These may have longer lead times which will be estimated on the product page. Please contact us for a more accurate lead time.

Yes. We have a trade counter near Wembley Stadium, London. Many of our most popular items are stocked here for immediate collection.

Stock availability is shown on every product page and is updated in real time. Items not stocked at our Wembley branch can usually be collected next day.

We're currently not able to offer an installation service due to the rapid growth of Stage Supply.

We hope to be able to offer this service again in the future.

We use Royal Mail for smaller items, FedEx and Parcelforce for larger items and The Pallet Network for Pallet delivery items.

Tracking for your order is provided on dispatch.