The Linea Research 44 M6 Dante combines 1,500W per channel across four channels with integrated Dante network audio, making it ideal for networked touring rigs and installed systems where centralised audio distribution is essential. Power figures are all-channels-driven – no burst ratings – and the onboard 96kHz DSP with LIR linear phase crossovers provides precise loudspeaker processing with lower latency than FIR-based alternatives. Independently verified as 7-10% more efficient than competing amplifiers, the M6 Dante reduces generator and power infrastructure requirements on tour.
Channels
4
Independent
Power per Channel
1,500W
@ 4 Ohms
Total Power
6,000W
All channels driven
Form Factor
2U
Rack mount
DSP Sample Rate
96kHz
LIR crossovers
Network Audio
Dante
Integrated
Dante Network Audio
This model includes integrated Dante for network audio distribution. Dante allows audio routing over standard Ethernet infrastructure, simplifying cabling and enabling centralised control of large-scale systems. For analogue-only requirements, the standard 44 M6 (ZR1258) is also available.
Features
✓
Integrated Dante network audio for routing over standard Ethernet infrastructure
Integrated Dante network audio for routing over standard Ethernet infrastructure
✓
All four channels deliver full rated power simultaneously – no derating
All four channels deliver full rated power simultaneously – no derating
✓
7-10% greater efficiency than competing amplifiers (independently verified)
7-10% greater efficiency than competing amplifiers (independently verified)
✓
96kHz DSP engine with LIR linear phase crossover filters for lower latency than FIR
96kHz DSP engine with LIR linear phase crossover filters for lower latency than FIR
✓
VX Limiter suite with Peak, RMS, Excursion and multi-band limiting for passive 2-way systems
VX Limiter suite with Peak, RMS, Excursion and multi-band limiting for passive 2-way systems
✓
Per-channel impedance selection: 2, 4 or 8 Ohms
Per-channel impedance selection: 2, 4 or 8 Ohms
✓
25V, 70V and 100V constant voltage output for distributed audio systems
25V, 70V and 100V constant voltage output for distributed audio systems
✓
Remote control via Ethernet with SE System Engineer software; front panel local control
Remote control via Ethernet with SE System Engineer software; front panel local control
✓
Preset management with Overlay grouping for Mutes, Gains, Delays and EQ
Preset management with Overlay grouping for Mutes, Gains, Delays and EQ
Specifications
| Channels | 4 |
| Power per Channel | 1,500W @ 4 Ohms |
| Impedance Options | 2, 4 or 8 Ohms per channel |
| Constant Voltage | 25V, 70V, 100V |
| DSP Sample Rate | 96kHz |
| Network Audio | Dante |
| Control | Ethernet (SE System Engineer) + front panel |
| Form Factor | 2U rack mount |
| SKU | ZR1258 Dante |
