Rated 4.9 (126 reviews)
The sE Electronics DM2 TNT Black is an active inline microphone preamp in a black finish, designed to sit between your dynamic or ribbon mic and your preamp, mixer, or interface. With selectable gain (+15dB or +30dB) and switchable impedance, it provides precise control over signal level and tonal character. Powered by standard 48V phantom power, an essential tool for getting the best out of low-output microphones.
+15dB / +30dB
Gain Settings · Selectable
Switchable
Impedance · Optimise for your mic
48V
Power · Phantom powered
Why Use an Inline Preamp?Dynamic and ribbon microphones often have low output levels that push budget preamps and interfaces into their noisy upper gain ranges. The DM2 adds clean gain before the preamp stage, keeping your signal well above the noise floor. Its eight switchable load settings, from 50 ohms to 10 megohms, let you match the input load the DM2 presents to your particular mic.
Features
Two selectable gain modes: +15dB for moderate boost, +30dB for low-output ribbons
Switchable impedance to shape mic response and tonal character
Inline XLR design, plugs directly between mic and preamp/mixer
Powered by standard 48V phantom power, no batteries required
Ideal for dynamic and ribbon microphones needing extra clean gain
Reduces noise floor on budget preamps and interfaces
Black finish for a clean, unobtrusive look on stage
Compatible with DM ProClip mounting accessory
NoteRequires 48V phantom power from your mixer, interface, or stage box. For passive dynamic and passive ribbon mics only; not for condenser or active ribbon microphones.
Specifications
| Type | Active inline microphone preamp |
| Gain | +15dB / +30dB (selectable) |
| Impedance | Switchable |
| Connection | Inline XLR (male to female) |
| Power | 48V phantom power |
| Finish | Black |
| SKU | DM2 BLACK |
