Rated 4.9 (120 reviews)
The Wolfmix WING is a DMX controller expansion for the Wolfmix W1, with eight motorised touch-sensitive faders, eight OLED displays and an 8 x 5 RGB button matrix. Connected to a W1 MK1, MK2 or MK3 over USB, the two work as one system with up to 8 DMX universes, and WING adds four DMX outputs plus cue list, fixture control and mapping modes. Typical uses are touring and club lighting, DJ and band shows, and rental stock.
8
Motorised faders
4
DMX outputs
8
Universes with W1
1.5 kg
Weight
Requires a Wolfmix W1WING is a companion to the W1 (MK1, MK2 or MK3), which is not included. Projects transfer from the W1, and WING can run standalone only after it has been synchronised with a W1.
Features
8 motorised faders with capacitive touch caps and RGB lightguides
8 OLED displays and an 8 x 5 RGB button matrix with dedicated group controls
Main fader with dedicated OK/GO and CANCEL buttons; SCROLL and FINE encoders plus 2 assignable encoders
CUE LIST mode with fade and hold times, automatic cue jumps and MIDI Time Code
CONTROL mode for direct fixture and parameter access from the faders
MAPPING mode for assigning faders, buttons and encoders across multiple pages
Up to 4 DMX universes, or 8 when used with a W1; each output assignable to any universe
Up to 680 fixtures and 1500 beams; 8 groups, each divisible into 8 subgroups
Generic MIDI controller mode for external hardware and software
Powers and connects to the W1 over USB-A; VESA 100 mount on the steel base
Specifications
| DMX outputs | 2x 3-pin XLR, 2x 5-pin XLR |
| DMX universes | Up to 4; up to 8 with W1 |
| Fixture capacity | 680 fixtures, 1500 beams |
| Power | USB-C, 15 V, 3 A |
| Data | USB-C; USB-A to connect and power the W1 |
| Processor / memory | 220 MHz ARM CPU, 8 MB RAM, 16 MB flash |
| Construction | ABS with powder-coated steel base plate |
| Mounting | 100 mm VESA, M4, 6 mm max screw depth |
| Dimensions (H x W x D) | 57 x 290 x 220 mm |
| Weight | 1.5 kg |
