The Elumen8 CABL299A is a 1.5m T-Connect to powerCON adaptor lead built on 2.5mm H07RN-F rubber cable, terminated in a PCE 16A T-Connect at one end and a Neutrik powerCON NAC3FCA at the other. The T-Connect format allows daisy-chained 16A power distribution down a row of fixtures from a single distro feed.
1.5m
LENGTH
16A
RATING · 240V single phase
2.5mm
CABLE · H07RN-F
T-Connect / powerCON
CONNECTORS
PCE T-Connect daisy chainingThe PCE T-Connect is a through-rated 16A connector that mates male and female on a single body, letting you run a single 16A feed and tee off to each fixture without separate splitters. Total chain load must remain within the 16A rating.
Features
2.5mm H07RN-F rubber-sheathed cable
PCE 16A T-Connect for daisy-chained power feeds
Neutrik powerCON NAC3FCA termination
Rated 16A at 240V single phase
Suited to lighting fixtures and powered audio with powerCON inlets
Flexible rubber jacket for repeated coiling
NoteThe powerCON end is the original NAC3FCA blue connector, not powerCON TRUE1 or TRUE1 TOP. Check the inlet on the receiving fixture before ordering.
Specifications
| SKU | CABL299A |
| Length | 1.5m |
| Cable | 2.5mm H07RN-F |
| Connector A | PCE 16A T-Connect |
| Connector B | Neutrik powerCON NAC3FCA |
| Rating | 16A, 240V single phase |
| Brand | Elumen8 |





