The Biamp Desono DX-IC10SUB (910-00101) is a passive 10 inch ceiling subwoofer finished in white, designed to extend low-frequency output in distributed ceiling systems. It runs on 70V/100V constant-voltage lines or 8 ohm low impedance via a front-face selector switch, and installs quickly with four SpringLock mounting clamps. A 41 Hz electronic high pass filter is required.
Key Features
Single 10 inch (254 mm) low-frequency driver
Selectable 70V/100V or 8 ohm low impedance
70V taps: 200W, 100W, 50W, 25W
100V taps: 200W, 100W, 50W
Front-face wattage and low impedance selector switch
Four SpringLock mounting clamps with 3 inch grip range
Edgeless magnetic grille design
Conduit knock-outs meet plenum air handling requirements
Requires a 41 Hz electronic high pass filter
White finish
Specifications
| Type | Passive ceiling subwoofer |
| Driver | 1 x 10 inch (254 mm) LF |
| Operating mode | Passive with DSP |
| Frequency range (-10 dB) | 42 Hz to 200 Hz |
| Sensitivity | 93 dB (1W / 2.83V at 1 m) |
| Power handling | 200W at 8 ohm |
| Maximum SPL | 116 dB continuous, 122 dB peak |
| 70V taps | 200W, 100W, 50W, 25W |
| 100V taps | 200W, 100W, 50W |
| Recommended amplifier | 200W to 400W at 8 ohm |
| Required accessory | 41 Hz electronic high pass filter |
| Input connection | 4-position Euroblock connector |
| Mounting | 4 SpringLock clamps, 3 inch grip range |
| Dimensions (W x D) | 394 x 263 mm |
| Weight | 11.8 kg |
| Finish | White |





