Dynacord IX60:4 Networked DSP Power Amplifier 4x1500W Dante 1U

Product code: 191897

£3,527.00 inc VAT
£2,939.17 ex VAT

SKU: F.01U.411.027

2 in stock (more available subject to additional lead time)

2 available online
More available from supplier in 1–3 weeks
FREE delivery by WednesdayOrder by 3pm tomorrow
Click & Collect Tuesday ›Collect from us in Wembley
VisaMastercardAmerican ExpressApple PayGoogle PayPayPalPayPal Credit
1 Year Manufacturer Warranty Included

About this Product

Output: 100V line or low impedance.

The Dynacord IX60:4 is a 4-channel networked DSP amplifier in 1U with 6000W of total power, rated at 4x 1500W into 4 ohms or 70V/100V lines. Built-in Dante, a 12 x 12 DSP matrix with FIR-Drive and 4 mic/line inputs let it act as amplifier and processor in one. It suits sports venues, houses of worship, performance spaces, hotels and conference venues.

4x 1500W
4 ohm, 70V, 100V
8 x 8
Dante
4
Mic/line inputs
1U
Rack height
SoftwareConfiguration and control are through Dynacord SONICUE Sound System Software; the amplifier can also act as a SONICUE control server for wall panels, TPC-1 touch panels, iOS and Windows devices.

Features

Four channels, 4x 1500W with all channels driven into 4 ohms, 70V or 100V
powerTANK sharing: a single channel can deliver up to 1800W into 4 ohms or 100V (no bridge mode)
Drives low-impedance or 70V/100V loads without transformers
8 x 8 Dante at 48 or 96 kHz with glitch-free redundancy (primary/secondary) or RSTP
4 mic/line inputs with 48V phantom power, usable as Dante break-in points
96 kHz DSP with 12 x 12 matrix mixer, EQ, dynamics, FX and FIR-Drive speaker processing
Pilot-tone detection on all inputs and pilot-tone generation up to 30 kHz
ghostPOWER: PoE on the primary port keeps DSP, Dante and mic/line inputs running without mains
TaskEngine for logic, scheduling and third-party control; AES70/OCA remote control
3 GPIO ports and a ready/fault relay

Specifications

Dynacord IX60:4 Networked DSP Power Amplifier 4x1500W Dante 1U specifications
Output power, all channels driven 2 ohm: 1000W, 2.7 ohm: 1300W, 4 ohm: 1500W, 8 ohm: 1200W, 70V: 1500W, 100V: 1500W
Maximum per channel 4 ohm: 1800W, 100V: 1800W
Bridged output Not available
Total rated output 6000W
Maximum output voltage / current per channel 145 Vpk / 33 Apk
Voltage gain 32 dB, adjustable 20 to 44 dB
Frequency response 20 Hz to 20 kHz (±1 dB)
THD+N <0.1% (3 dB below max, 1 kHz)
Latency, analogue in to speaker out 0.77 ms
Mic/line inputs 4, 2x 5-pin Euroblock; 0 to 60 dB gain, +18 dBu max, 48V phantom
Speaker outputs 2x 4-pin Euroblock (6 mm²)
Network 2x RJ45, 1000/100 Mbit, integrated switch; Dante 8 x 8
Control port 8-pin Euroblock: 3 GPIO, ready/fault relay
Power consumption 1050W at 1/8 max output; eco 33W; standby <15W
Mains 100 to 240 V AC, 50/60 Hz, PFC, IEC C14
Cooling Front to rear, temperature-controlled fan
Dimensions (H x W x D) 44.1 x 483 x 447 mm, 1U
Weight 8.6 kg

Full features

  • 4-channel networked DSP amplifier with 6 kW powerTANK for Hi-Z and Lo-Z operation
  • 8 x 8 Dante with OCA/AES70 remote control, 4 mic/line inputs usable as Dante break-in
  • 96 kHz fully featured DSP matrix mixer and MXE-style TaskEngine for system logic, automation, scheduling and integration
  • ghostPOWER via PoE to maintain DSP, Dante network and mic/line inputs
  • High efficiency ecoRAIL technology for lower operating costs

Full specifications

Output Power

  • Total rated output power: 6,000
  • Number of amplifier channels: 4
  • All channels driven equally:
    • 2 Ω: 1.000 W
    • 2.7 Ω: 1.300 W
    • 4 Ω: 1.500 W
    • 8 Ω: 1.200 W
  • Maximum per channel:
    • 2 Ω: 1.000 W
    • 2.7 Ω: 1.300 W
    • 4 Ω: 1.800 W
    • 8 Ω: 1.200 W
  • Bridge:
    • n/a
  • All channels driven equally:
    • 70 V: 1.500 W
    • 100 V: 1.500 W
  • Maximum per channel:
    • 70 V: 1.500 W
    • 100 V: 1.800 W
  • Max. output voltage Hi-Z/8Ω mode, per channel: 145 Vpk
  • Max. output current Lo-Z/4Ω mode, per channel: 33 Apk

Amplifier

  • Voltage Gain Lo-Z mode, ref. 1 kHz: 32 dB, adjustable 20.0 - 44.0 dB
  • Input sensitivity, direct drive mode: +6 dBu ( 1.55 V), fixed
  • THD+N (3 dB below max. AES17, 1 kHz) : <0,1 %
  • Crosstalk (ref. 1 kHz, 12 dB below max. 8Ω): < -80 dB
  • Frequency response (ref. 1 kHz, analogue in-speaker out): 20 Hz to 20 kHz (±1 dB)
  • Sampling rate: 96 kHz internal, Dante 48/96 kHz switchable
  • Latency (analogue in-speaker out): 0.77 ms
  • Number of mic/line inputs: 4
  • Gain: 0 to 60 dB
  • Maximum input level: +18 dBu
  • Phantom power: + 48 V, switchable per input
  • Input impedance: >10 kΩ
  • E.I.N (A-weighted) @ 150Ω: -127 dBu
  • Crosstalk (ref. 1 kHz, 12 dB below max. 8Ω): <-80 dB

Connectivity

  • Mic/Line inputs: 2 x 5-pin Euroblock-style, male
  • Speaker outputs: 2 x 4-pin Euroblock-style, 6 mm² (10 AWG)
  • Network: 2 x RJ45
  • Control port: 1 x 8-pin Euroblock-style
  • Mains power input: 1 x IEC C14

Network

  • General: 1000base-T/100base-TX, integrated switch
  • Redundancy modes: Glitchfree (PRIMARY/SECONDARY), RSTP
  • Backup power supply (ghostPOWER): 1 x PoE (IEEE802.3af) on PRIMARY port
  • Network audio (inputs x outputs): 8 x 8, 48/96 kHz, Dante

Control Port

  • GPIO control port: 3 ports, switchable: analogue in/digital in/digital out
  • Analogue input range: 0 V to +13 V, 133 kΩ input resistance
  • Digital input limits
    • ON: <1,5 V
    • OFF: >2,0 V, internal pull-up (10kΩ / 10V)
  • Digital outputs
    • ON: output switched to GND, max. 200 mA
    • OFF: open collector
  • Reference voltage output: +10V, max. 200 mA, supervised, short circuit protected
  • READY/FAULT: Galvanic isolated relay, max. 30 VDC/500 mADC

General

  • Rated power consumption (1/8 max. output power): 1.050 W
  • Eco mode: 33 W
  • Stand-by mode: <15 W
  • Power requirements: 100 V to 240 V, 50 Hz to 60 Hz AC
  • Power Supply Technology: Switching mode power supply with digitally controlled power factor correction
  • Protections: Audio Limiters, High Temperature, DC, HF, Short Circuit, Back-EMF, Peak Current Limiters, Inrush Current Lim colspan="4"iters, Mains Over-/Under Voltage Protection
  • Cooling: Front-to-rear, temperature controlled fan, supervised
  • Ambient Temperature Limits: +5 °C to +40 °C (+40 °F to +105 °F)
  • Dimensions: 483 mm x 44,1 mm x 447 mm
  • Weight: 8,6 kg (19 lbs)

Product Reviews

No reviews yet — be the first to review this product.

Similar Products

Frequently Asked Questions

We’re a working touring and events production company founded in 2019 by sound engineers with many years of experience. 

We’re very selective about the products we sell. Everything we supply we use ourselves on our tours, events and productions. This means we can offer a level of buying advice and aftersales support that can’t be beaten.

We’re official dealers of brands such as Allen & Heath, Audio Technica and sE Electronics. We also stock other leading brands including Shure, Sennheiser, Martin Audio and Chauvet Professional.

We accept Visa, Mastercard, American Express, Apple Pay, Google Pay and Paypal. We also offer finance through Paypal Credit and Klarna.

Business Customers can choose to receive a Proforma Invoice on checkout to pay by bank transfer.

Yes. We run an AV production business and have AV Engineers on hand to provide advice and technical support during our operating hours.

The quickest way to contact us for advice and support is through WhatsApp or Email.

Many of our customers are trade/industry buyers and we have already factored this into our pricing. Trade discounts may be available for bulk quantities on some products.

We also offer quantity discounts on some products on our website.

You can order on our website for delivery to the UK (Including Northern Ireland), Isle of Man, Jersey, Guernsey and the Republic of Ireland.

We can ship many items to the EU and other countries worldwide. Our dealer agreements may prevent us sending some items to certain countries.

Please contact us for a quotation if you need something shipped to a country not offered at checkout.

Please see our Returns page for information on our returns policy and to start a return online.

Generally if you change your mind you can return your item for a full refund within 30 days of delivery (14 days for business customers) - as long as the product is unopened and unused.

If an item is faulty or damaged we will arrange collection free of charge and repair/replace it as quickly as possible.

Estimated delivery times are shown on the product page. For items in stock we aim to get your order to you within 1 - 2 working days.

Some items are ordered directly from the manufacturer. These may have longer lead times which will be estimated on the product page. Please contact us for a more accurate lead time.

Yes. We have a trade counter near Wembley Stadium, London. Many of our most popular items are stocked here for immediate collection.

Stock availability is shown on every product page and is updated in real time. Items not stocked at our Wembley branch can usually be collected next day.

We're currently not able to offer an installation service due to the rapid growth of Stage Supply.

We hope to be able to offer this service again in the future.

We use Royal Mail for smaller items, FedEx and Parcelforce for larger items and The Pallet Network for Pallet delivery items.

Tracking for your order is provided on dispatch.