Listen Technologies Auri TX2N Auracast 2-Channel Transmitter Black

£1,625.00 inc VAT
£1,354.17 ex VAT

3 in stock (more available subject to additional lead time)

3 available online
More available from supplier in 1–3 weeks
FREE delivery by WednesdayOrder by 3pm tomorrow
Click & Collect Tuesday ›Collect from us in Wembley
VisaMastercardAmerican ExpressApple PayGoogle PayPayPalPayPal Credit
1 Year Manufacturer Warranty Included

About this Product

The Listen Technologies Auri TX2N is a two-channel Auracast assistive listening transmitter in black, mounted on a wall or ceiling like a Wi-Fi access point. It broadcasts Bluetooth LE Audio that compatible phones, earbuds and hearing aids can receive directly, with Auri RX1 receivers available for guests without an Auracast device. Typical uses are theatres, lecture halls, places of worship, council chambers, meeting rooms and conference venues.

2
Auracast radios
BT 5.3
LC3 codec
PoE
802.3af or USB-C
183 x 173 mm
Footprint
Who can listenGuests receive the broadcast on Auracast-compatible phones, earbuds or hearing aids. Not every device supports Auracast yet, so most venues also keep Auri RX1 receivers (with LA-470 neck loops for telecoil users) to lend out.
No DanteThis model has analogue inputs and Listen network audio only. For a Dante feed, choose the TX2N-D.

Features

Two Auracast radios, each with its own broadcast and input routing
Two balanced mic/line inputs with switchable 24V phantom power
Input routing per stream: input 1, input 2, stereo pair or mono sum
Open or password-encrypted broadcasts (AES128)
Switchable AGC and low-cut filter
Audio can be shared between TX2N units on the same network; repeater mode extends coverage
Single network cable for PoE, control and audio, or USB-C power
Set up and managed with Listen Auri Manager software
Balanced line output for recording or feeding other equipment

Specifications

Listen Technologies Auri TX2N Auracast 2-Channel Transmitter Black specifications
Inputs 2x balanced mic/line, 3-pin 3.5 mm Euroblock, 15 kohm
Mic mode Sensitivity -65 dBu, max -25 dBu, switchable +24V phantom
Line mode Sensitivity -25 dBu, max +16 dBu
Line output Balanced, 3-pin 2.5 mm Euroblock, +1 dBu nominal, 150 ohm
Radio Bluetooth 5.3, Auracast broadcast only, LC3 codec, 2400 to 2482 MHz
Maximum RF output (UK/Europe) +10 dBm, adjustable down to -10 dBm
Encryption AES128-CCM, 4 to 16 character password
Sample rates 16 kHz and 24 kHz (Auracast Standard), 48 kHz (Auracast High)
Frequency response (±3 dB) 50 Hz to 7.5 kHz (16 kHz), 11 kHz (24 kHz), 22.5 kHz (48 kHz)
Latency 13 ms internal; 29 to 45 ms end to end with Auri RX1
Network 100 Mbit RJ45 shared for PoE, control and audio over IP; DHCP, static or link-local
Power PoE IEEE 802.3af (2.54W) or USB-C 5V PD (1.85W)
Dimensions 183 x 173 x 48 mm
Weight 0.45 kg
Colour Black
Mounting Removable wall/ceiling bracket; fits UK, EU and US back boxes and VESA 75
Environment IP30 with bracket, -10 to 40°C operating

Full features

  • 2 radios with flexible routing options
  • Expandable with repeater mode
  • Network management
  • 2 balanced mic/line inputs with phantom power
  • Powered by USB-C or PoE
  • Available in white and black finishes.

Full specifications

Inputs

  • Audio Output:  2x audio inputs individually selectable between mic, line or optional Dante modes
  • Mic/Line Inputs
    • Connection:  2x 3-way 3.5mm pitch Euroblock
    • Input impedance:  15kΩ
    • THD+N:
      • 0.03% at 0dBu (line mode)
      • 0.02% at –25dBu (mic mode)
    • Common mode rejection:  56dB
  • Microphone Mode
    • Max level before clipping:  -25 dBu
    • Sensitivity:  -65 dBu
    • Switchable phantom power:  +24 V
  • Line Mode
    • Max level before clipping:  +16 dBu
    • Sensitivity:  -25 dBu

Outputs

  • Line Output
    • Connection:  1x 3-way 2.5mm pitch Euroblock
    • Nominal output level:  +1dBu
    • Output impedance:  150Ω
  • Radio
    • Bluetooth version:  5.3
    • Operating Frequency:  2400 to 2482 MHz
    • Operating mode:  Auracast™ Compliant, Broadcast Only
    • Supported codec:  LC3
    • Maximum output power:
      • North America: +20dBm
      • Rest of World: +10dBm
    • Output power control:  Attenuation from regional max to -10dBm
    • Encryption:  AES128-CCM encryption, with 4-16 character password
    • Supported formats:  Mono or Stereo

Network Audio

  • Input routing:  Additional input source for each audio stream, must be selected from another TX2N on same network
  • Connection:  Shared RJ45 with control and PoE
  • Channels:
    • 2x stereo inputs
    • 2x stereo outputs
  • Format:  Multicast RTP
  • Bit depth:  16 bit
  • Sample rate:  16kHz, 24kHz or 48kHz, matched to broadcast
  • Bandwidth:  0.5Mbit/s (16kHz) to 1.5Mbit/s (48kHz) per stereo stream
  • Latency:  5 ms nominal

Audio Processing

  • Input routing:  Disabled, Input 1 Only, Input 2 Only, Input 1 & 2 Stereo Pair, Input 1 & 2 Mono Sum
  • AGC:  Switchable, 20dB gain control range
  • Low cut:  Switchable, 24 dB/oct, frequency based on sample rate
  • 16 kHz sample rate:  75 Hz
  • 24 kHz sample rate:  110 Hz
  • 48 kHz sample rate:  220 Hz
  • Sample rates:
    • 16 kHz, 24 kHz (Auracast Standard – required)
    • 48 kHz (Auracast High)
  • Frequency response +/- 3 dB (internal, line in to line out):  16 kHz sample rate: 50 Hz – 7.5 kHz
  • 24 kHz sample rate:  50 Hz – 11.0 kHz
  • 48 kHz sample rate:  50 Hz – 22.5 kHz
  • Latency (internal, line in to line out):  13ms
  • Latency (complete system, end to end): Auri RX1 – 29 ms to 45 ms (dependant on sample rate and mono/stereo) Other receivers will vary

Network

  • Port speed:  100 Mbit
  • IP address:  DHCP, static or link-local
  • Protocols:  mDNS, UDP (unicast), RTP (multicast), RTCP (multicast)
  • Security:  UDP communication AES256-GCM

Controls and Indication

  • Buttons:  Recessed restart and factory reset buttons
  • Setup/Programming:  Via Auri Manager Software
  • Status LED:  RGB multi-function LED, see handbook for states

Power

  • PoE:  IEEE 802.3af
  • USB-C:  5V PD Compliant
  • Power consumption (nominal):  USB-C: 5V, 370mA (1.85W)
  • PoE:  48V, 53mA (2.54W)

Environmental

  • Temperature – Storage:  -40 °C (-40 °F) to 70 °C (+158 °F)
  • Temperature – Operation:  -10 °C (14 °F) to 40 °C (+104 °F)
  • Relative Humidity:  0 to 95% relative humidity, non-condensing
  • IP Rating:  IP30 (with mounting bracket attached)

Compliance

  • Standards:  FCC, ISED, CE, UKCA, RCM, MIC, RoHS, REACH, WEEE

Physical

  • Dimensions:  183 x 173 x 48 mm (7.20 x 6.81 x 1.89 in.)
  • Weight:  TX2N – 0.45 kg (0.99 lbs.)
  • Enclosure Material:  PC-ABS
  • Colour:  Black
  • Mounting:
    • Removable wall/ceiling bracket
    • Multiple holes to support mounting on standard UK, EU and US electrical back boxes and VESA 75

Product Reviews

No reviews yet — be the first to review this product.

Similar Products

Frequently Asked Questions

We’re a working touring and events production company founded in 2019 by sound engineers with many years of experience. 

We’re very selective about the products we sell. Everything we supply we use ourselves on our tours, events and productions. This means we can offer a level of buying advice and aftersales support that can’t be beaten.

We’re official dealers of brands such as Allen & Heath, Audio Technica and sE Electronics. We also stock other leading brands including Shure, Sennheiser, Martin Audio and Chauvet Professional.

We accept Visa, Mastercard, American Express, Apple Pay, Google Pay and Paypal. We also offer finance through Paypal Credit and Klarna.

Business Customers can choose to receive a Proforma Invoice on checkout to pay by bank transfer.

Yes. We run an AV production business and have AV Engineers on hand to provide advice and technical support during our operating hours.

The quickest way to contact us for advice and support is through WhatsApp or Email.

Many of our customers are trade/industry buyers and we have already factored this into our pricing. Trade discounts may be available for bulk quantities on some products.

We also offer quantity discounts on some products on our website.

You can order on our website for delivery to the UK (Including Northern Ireland), Isle of Man, Jersey, Guernsey and the Republic of Ireland.

We can ship many items to the EU and other countries worldwide. Our dealer agreements may prevent us sending some items to certain countries.

Please contact us for a quotation if you need something shipped to a country not offered at checkout.

Please see our Returns page for information on our returns policy and to start a return online.

Generally if you change your mind you can return your item for a full refund within 30 days of delivery (14 days for business customers) - as long as the product is unopened and unused.

If an item is faulty or damaged we will arrange collection free of charge and repair/replace it as quickly as possible.

Estimated delivery times are shown on the product page. For items in stock we aim to get your order to you within 1 - 2 working days.

Some items are ordered directly from the manufacturer. These may have longer lead times which will be estimated on the product page. Please contact us for a more accurate lead time.

Yes. We have a trade counter near Wembley Stadium, London. Many of our most popular items are stocked here for immediate collection.

Stock availability is shown on every product page and is updated in real time. Items not stocked at our Wembley branch can usually be collected next day.

We're currently not able to offer an installation service due to the rapid growth of Stage Supply.

We hope to be able to offer this service again in the future.

We use Royal Mail for smaller items, FedEx and Parcelforce for larger items and The Pallet Network for Pallet delivery items.

Tracking for your order is provided on dispatch.