Ecler AURA-2B600 Installation Amplifier 2x600W 100V

Product code: 194467

£646.00 inc VAT
£538.33 ex VAT

SKU: ECL0112

6 in stock

6 available online
FREE delivery by WednesdayOrder by 3pm tomorrow
Click & Collect Tuesday ›Collect from us in Wembley
VisaMastercardAmerican ExpressApple PayGoogle PayPayPalPayPal Credit
1 Year Manufacturer Warranty Included

About this Product

Output: 100V line or low impedance.

The Ecler AURA-2B600 is a two-channel Class D installation amplifier rated at 2x 600W into 4 ohms. The outputs switch between low impedance (2, 4 or 8 ohms) and 70V or 100V line, or can be bridged, so one 1U unit can drive either direct-coupled speakers or a long 100V line. It is used for background music and paging in bars, restaurants, hotels, retail, gyms and schools.

2x 600W
Into 4 ohms
600W
Per channel at 100V
1300W
Bridged, 4 ohms
1U
Rack height

Features

Two channels, 2x 600W into 4 ohms, 300W per channel into 8 ohms, 800W into 2 ohms
Output mode set per pair of channels by rear DIP switch: low impedance, 70V or 100V line, or bridge
Bridged output of 1300W into 4 ohms or 900W into 8 ohms
Link switch per input routes input 1 to other channels
Front panel level knobs, which can be locked or bypassed from rear panel switches
Auto standby when no signal is present, plus front panel standby button
Protection against DC, HF, short circuit and over-temperature, with clip limiter
Universal mains supply with power factor correction
Locking Euroblock connectors for inputs and outputs

Specifications

Ecler AURA-2B600 Installation Amplifier 2x600W 100V specifications
Channels 2 in, 2 out
Output power, all channels driven (1% THD) 8 ohm: 300W, 4 ohm: 600W, 2 ohm: 800W, 100V/70V: 600W per channel
Bridged output 4 ohm: 1300W, 8 ohm: 900W
Amplifier technology Class D
Voltage gain 34 dB
Input sensitivity 0 dBV (1 Vrms)
Input impedance 20 kohm, balanced
Maximum input level +18 dBV (+20.2 dBu)
Frequency response 15 Hz to 30 kHz
THD+N <0.01%
Signal-to-noise ratio 100 dBA
Crosstalk >70 dB
Damping factor >150
Input connectors 3-pin Euroblock, balanced, 3.5 mm pitch
Output connectors 2-pin Euroblock, 7.62 mm pitch
Mains 100 to 240V AC, 50/60 Hz, IEC C14 inlet, PFC >0.92
Power draw at 230V 1/8 power into 4 ohms: 226.2W; idle: 62.4W; standby: 2.2W
Efficiency 79%
Cooling 2 fans, 58 dBA maximum
Operating temperature -10 to 50°C
Dimensions (W x H x D) 484 x 44 x 411.6 mm, 1U rack
Weight 6.7 kg

Full features

  • 2 analogue audio inputs and 2x600WRMS @4Ω powered audio outputs.
  • Low (2, 4 and 8Ω) and high impedance (70/100V) compatibility via rear panel switch.
  • Supports dual or bridge mode (@4/8Ω).
  • Euroblock input and output connectors.
  • Euroblock connectors with anti-pulling locking system.
  • Link to input 1 available.
  • The front panel volume control knobs can be locked using the rear panel switches for added security.
  • High efficiency (Class D).
  • Auto Standby function.
  • Fan cooling.
  • Thermal protection.
  • Overload protection.
  • Anti-clip system.

Channels

  • Number of output channels: 2
  • Output connection type: 2-pin Euroblock.  Pitch: 7,62mm
  • Number of input channels: 2
  • Input connection type: 3-pin Euroblock, balanced, pitch 3,5mm
  • Input configuration: Input link to CH1 selector per input

Output Power - All Channels Driven @1Khz @Cf9Db @ 1%Thd

  • Max output power @ 8Ω: 300W
  • Max output power @ 4Ω: 600W
  • Max output power @ 2Ω: 800W
  • Max output power @ 4Ω bridge mode: 1300W
  • Max output power @ 8Ω bridge mode: 900W
  • Max output power @ 100V: 600W
  • Max output power @ 70V: 600W

Output Power - Single Channel Driven @1Khz @Cf9Db @ 1%Thd

  • Max output power @ 8Ω: 300W
  • Max output power @ 4Ω: 600W
  • Max output power @ 2Ω: 900W
  • Max output power @ 4Ω bridge mode: 1300W
  • Max output power @ 8Ω bridge mode: 900W
  • Max output power @ 100V: 600W
  • Max output power @ 70V: 600W

Signal

  • Voltage gain: 34 dBΩ
  • Input sensitivity: 0 dBV
    2,21 dBu
    1 Vrms
  • Input impedance: 20kΩ balanced
  • Max input level: +18dBV
    20,21 dBu
  • Frequency response: 15Hz - 30kHz
  • THD + Noise: <0,01%
  • SNR: 100dBA
  • Crosstalk: >70dB
  • CMRR: > 55 Typ
  • Damping factor: >150

Electrical

  • Power supply: Universal, regulated SMPS with PFC
  • AC mains requirement: 100-240V @ 50-60Hz (±10%)
  • Power factor correction: > 0,92
  • AC mains connector: IEC C14 inlet

Power & Heat @230Vac - 1/4 Power, @ 4Ω (All Channels Driven)

  • Power: 380W
    430 VA
  • Current Draw: 1,86 Arms
  • Thermal Loss: 68,8 kcal/h
    273 BTU/h

Power & Heat @230Vac - 1/8 Power, @ 4Ω (All Channels Driven)

  • Power: 226,2W
    278 VA
  • Current Draw: 1,20 Arms
  • Thermal Loss: 65,5 kcal/h
    260,1 BTU/h

Power & Heat @230Vac - Idle

  • Power: 62,4W
    129 VA
  • Current Draw: 0,56 Arms
  • Thermal Loss: 53,7 kcal/h
    212,9 BTU/h

Power & Heat @230Vac - Standby/Sleep Mode

  • Power: 2,2W
    82 VA
  • Current Draw: 0,35 Arms
  • Thermal Loss: 1,8 kcal/h
    7,3 BTU/h

Power & Heat @120Vac - 1/4 Power, @ 4Ω (All Channels Driven)

  • Power: 380,6W
    393 VA
  • Current Draw: 3,45 Arms
  • Thermal Loss: 69,3 kcal/h
    275,1 BTU/h

Power & Heat @120Vac - 1/8 Power, @ 4Ω (All Channels Driven)

  • Power: 226,7W
    239 VA
  • Current Draw: 2,09 Arms
  • Thermal Loss: 66,01 kcal/h
    261,8 BTU/h

Power & Heat @120Vac - Idle

  • Power: 62,8W
    81 VA
  • Current Draw: 0,70 Arms
  • Thermal Loss: 54,01 kcal/h
    214,3 BTU/h

Power & Heat @120Vac - Standby/Sleep Mode

  • Power: 1,3W
    24 VA
  • Current Draw: 0,20 Arms
  • Thermal Loss: 1,1 kcal/h
    4,4 BTU/h

Technologies

  • Amplification technology: Class D
  • Energy saving: Auto standby function selectable
  • Efficiency: 79%
  • Cooling: 2 fans
  • Maximum fan noise: 58 dBA

Protections

  • DC protection: Yes
  • HF protection: Yes
  • Short-circuit protection: Yes
  • Clip limiter: Yes
  • Thermal protection: Yes

Local Control

  • Attenuators: Front panel knobs per channel
    VOL (default)/BYPASS option
  • Output mode settings: Back panel Dipswitch by pairs of channels
    DUAL/BRIDGE
    LoZ/70V/100V
  • RUN/SLEEP mode: Auto standby function
    Front panel button
  • Power ON/OFF: Front panel switch

Monitoring

  • Signal Present: SIGNAL LED (Green) per channel
  • Cliping: CLIP LED (Red) per channel
  • Protect: PROT LED (Red) by pairs of channels
  • Standby: AUTO STANDBY ON/OFF LED (Green) per unit
  • Standby / Mute: AUTO STANDBY (Orange) by pairs of channels
  • Thermal: TH LED (Orange) by pairs of channels
  • On: ON LED (Green) per unit
  • Link: LINK LED (White) per channel

Physical

  • Operating temperature: Min:-10⁰ ; 14⁰ C
    Max: 50⁰ ; 122⁰ F
  • Operating humidity: 5 - 85% RH, non-condensing
  • Storage temperature: Min:-10⁰ ; 14⁰ C
    Max: 50⁰ ; 122⁰ F
  • Storage humidity: 5 - 85% RH, non-condensing
  • Dimensions: 484 x 44 x 411.6mm / 19 x 1,73 x 16.20 in. (WxHxD)
  • Weight: 6.7kg / 14.77 lb
  • Shipping dimensions: 590 x 80 x 590mm / 23.23 x 3.15 x 23.23 in. (WxHxD)
  • Shipping weight: 9.45kg / 20.83 lb

Product Reviews

No reviews yet — be the first to review this product.

Similar Products

Frequently Asked Questions

We’re a working touring and events production company founded in 2019 by sound engineers with many years of experience. 

We’re very selective about the products we sell. Everything we supply we use ourselves on our tours, events and productions. This means we can offer a level of buying advice and aftersales support that can’t be beaten.

We’re official dealers of brands such as Allen & Heath, Audio Technica and sE Electronics. We also stock other leading brands including Shure, Sennheiser, Martin Audio and Chauvet Professional.

We accept Visa, Mastercard, American Express, Apple Pay, Google Pay and Paypal. We also offer finance through Paypal Credit and Klarna.

Business Customers can choose to receive a Proforma Invoice on checkout to pay by bank transfer.

Yes. We run an AV production business and have AV Engineers on hand to provide advice and technical support during our operating hours.

The quickest way to contact us for advice and support is through WhatsApp or Email.

Many of our customers are trade/industry buyers and we have already factored this into our pricing. Trade discounts may be available for bulk quantities on some products.

We also offer quantity discounts on some products on our website.

You can order on our website for delivery to the UK (Including Northern Ireland), Isle of Man, Jersey, Guernsey and the Republic of Ireland.

We can ship many items to the EU and other countries worldwide. Our dealer agreements may prevent us sending some items to certain countries.

Please contact us for a quotation if you need something shipped to a country not offered at checkout.

Please see our Returns page for information on our returns policy and to start a return online.

Generally if you change your mind you can return your item for a full refund within 30 days of delivery (14 days for business customers) - as long as the product is unopened and unused.

If an item is faulty or damaged we will arrange collection free of charge and repair/replace it as quickly as possible.

Estimated delivery times are shown on the product page. For items in stock we aim to get your order to you within 1 - 2 working days.

Some items are ordered directly from the manufacturer. These may have longer lead times which will be estimated on the product page. Please contact us for a more accurate lead time.

Yes. We have a trade counter near Wembley Stadium, London. Many of our most popular items are stocked here for immediate collection.

Stock availability is shown on every product page and is updated in real time. Items not stocked at our Wembley branch can usually be collected next day.

We're currently not able to offer an installation service due to the rapid growth of Stage Supply.

We hope to be able to offer this service again in the future.

We use Royal Mail for smaller items, FedEx and Parcelforce for larger items and The Pallet Network for Pallet delivery items.

Tracking for your order is provided on dispatch.