Ecler CA40 Micro Amplifier 2x20W with RS-232

Product code: 194665

£293.00 inc VAT
£244.17 ex VAT

SKU: ECL0100

4 in stock

4 available online
FREE delivery by WednesdayOrder by 3pm tomorrow
Click & Collect Tuesday ›Collect from us in Wembley
VisaMastercardAmerican ExpressApple PayGoogle PayPayPalPayPal Credit
1 Year Manufacturer Warranty Included

About this Product

Output: Low impedance.

The Ecler CA40 is a compact fanless stereo amplifier rated at 2x 20W into 4 ohms, with a microphone input, two stereo line inputs and tone controls. It can be run in stereo, parallel or bridged mono, and controlled by IR remote, a 0 to 10V Ecler wall panel or RS-232. It is sized for classrooms, meeting rooms, small shops, cafés and reception areas.

2x 20W
Into 4 ohms
1x 36W
Bridged, 8 ohms
RS-232
Control port
Fanless
Cooling
Mounting and powerPowered by an external universal 24V DC supply. Designed to sit on a wall or under a shelf, table or cupboard rather than in a rack.

Features

2x 20W into 4 ohms; stereo, parallel or bridged mono
1 balanced microphone input (Euroblock or jack, -20 to -50 dBV) with +24V phantom power set by internal jumper, noise gate and talkover priority
2 unbalanced stereo line inputs on minijack or dual RCA
Bass and treble controls
Auxiliary line output for linking to another amplifier
Rotary encoder for local control, IR remote control supplied
0 to 10V remote port for Ecler WPaVOL or WPaVOL-SR wall panels (volume and input or preset selection)
RS-232 port for EclerCOMM software and the CA-NET protocol
Mute input triggered by a dry contact, for example from a fire alarm system
Auto standby after 120 seconds without signal; fanless convection cooling

Specifications

Ecler CA40 Micro Amplifier 2x20W with RS-232 specifications
Rated power 2x 20W into 4 ohms
Measured power (1% THD) 2x 18W into 4 ohms, 2x 10W into 8 ohms, 1x 36W bridged into 8 ohms
Output modes Stereo, parallel or bridged mono
Inputs 1 mic (balanced Euroblock or jack), 2 stereo line (minijack or dual RCA)
Input sensitivity Line: 0 dBV (-6 dBV internally selectable); mic: -20 to -50 dBV
Input impedance Line: >8 kohm; mic: >1 kohm
Frequency response 20 Hz to 50 kHz (-3 dB)
THD+N Speaker out: <0.15% (1 kHz); aux out: <0.02%
Signal-to-noise ratio Line: >85 dB; mic: >65 dB
Outputs Speaker out (Euroblock), aux line out
Control IR remote, 0 to 10V remote port, RS-232, mute contact
Power External 24V DC supply, 100 to 240V AC
Power consumption 1/8 power into 4 ohms: 7W; standby: <3W
Dimensions (W x H x D) 155 x 45 x 155 mm
Weight 0.65 kg
Included REVO-IR remote control

Full features

  • Digital local control, encoder type
  • Infrared remote control included
  • Remote control compatible with WPaVOL and WPaVOLSR wall panels (0-10 VDC)
  • RS-232 control port compatible with EclerCOMM software and CA-NET protocol
  • MUTE port for external muting of the unit when an evacuation system must be activated
  • Presets / sources management via RS-232 or 0-10 VDC remote control port
  • AUTO STANDBY function
  • Light and silent (fanless) design

Channels

  • Number of output channels: 2 + 1 AUX
  • Output connection type: Euroblock
  • Output configuration: 2 x 20W RMS @ 4Ω amplifier
  • Number of input channels: 3
  • Input connection type: MIC: balanced Euroblock or jack
    LINE: unbalanced minijack or double RCA
  • Input configuration: 1 MIC input
    2 LINE inputs

Output Power - All Channels Driven @ 1%Thd

  • Max output power @ 8Ω: STEREO 2x10W
  • Max output power @ 4Ω: STEREO 2x18W
  • Max output power @ 8Ω bridge mode: 1x36W

Signal

  • Input sensitivity: LINE: 0dBV (-6dBV internally selectable)
    MIC: -20 to -50dBV
  • Input impedance: LINE: >8kΩ
    MIC: >1kΩ
  • Frequency response: 20Hz - 50kHz (-3dB)
  • THD + Noise: SPRK OUT: < 0.15% @ 1kHz
    AUX OUT: < 0.02%
  • SNR: LINE: >85dB
    MIC (BAL): >65dB
  • Crosstalk: >55dB @ 1kHz
  • CMRR: MICRO (BAL): >65dB @ 1kHz

Electrical

  • Power supply: Universal external power source
  • AC mains requirement: 100-240V @ 50-60Hz + External PSU 24VDC
  • AC mains connector: DC24V power connector

Power Consumption

  • Power Consumption (1/3 POWER, @ 4Ω all channels driven): pink noise, 13W / 32VA
  • Power Consumption (1/8 POWER, @ 4Ω all channels driven): pink noise, 7W / 21VA
  • Power Consumption (STBY/SLEEP): <3W

Technologies

  • Energy saving: Auto standby function
  • Cooling: Convection (fanless)

Protections

  • AC protection: No
  • DC protection: No
  • VHF protection: No
  • Short-circuit protection: No
  • Clip limiter: No
  • Long term limiter: No
  • Thermal protection: No

Remote Control Connections

  • GPIs: Volume & Input selection (0-10V. based)
  • External MUTE: Power free contact (infrared remote)

Settings

  • Attenuators: Front panel knob
  • Tone control: 2-band independent tone control (Bass, Treble) for the microphone in-jack and 1&2 line-in connection.
  • Output settings: Stereo, parallel, and bridged mono outputs
  • Auto standby function: Rear panel micro switch
  • Auto standby time: 120 seconds

Connectivity

  • Serial port: RS-232
  • Programing and control: EclerCOMM software or CA-NET protocol

Monitoring

  • Signal Present: SP LED (Green)
  • Cliping: CLIP LED (Red)
  • Standby: STBY LED (Orange)

Physical

  • Operating temperature: Min: -10°C ; 14°F
    Max: 40°C ; 104°F
  • Operating humidity: <85% HR
  • Storage temperature: Min: -10°C ; 14°F
    Max: 40°C ; 104°F
  • Storage humidity: <90% HR
  • Installation options: Wall or under a surface (table, shelf, cupboard, etc.)
  • Included accessories: REVO-IR remote control
  • Optional accessories: WPaVOL or WPaVOL-SR for remote control
  • Dimensions: 155 x 45 x 155mm / 6.1 x 1.77 x 6.1 in. (WxHxD)
  • Weight: 0.65kg / 1.43 lb
  • Shipping dimensions: 220 x 60 x 170mm / 8.66 x 2.36 x 6.7 in. (WxHxD)
  • Shipping weight: 1.4kg / 3.1 lb

Product Reviews

No reviews yet — be the first to review this product.

Similar Products

Frequently Asked Questions

We’re a working touring and events production company founded in 2019 by sound engineers with many years of experience. 

We’re very selective about the products we sell. Everything we supply we use ourselves on our tours, events and productions. This means we can offer a level of buying advice and aftersales support that can’t be beaten.

We’re official dealers of brands such as Allen & Heath, Audio Technica and sE Electronics. We also stock other leading brands including Shure, Sennheiser, Martin Audio and Chauvet Professional.

We accept Visa, Mastercard, American Express, Apple Pay, Google Pay and Paypal. We also offer finance through Paypal Credit and Klarna.

Business Customers can choose to receive a Proforma Invoice on checkout to pay by bank transfer.

Yes. We run an AV production business and have AV Engineers on hand to provide advice and technical support during our operating hours.

The quickest way to contact us for advice and support is through WhatsApp or Email.

Many of our customers are trade/industry buyers and we have already factored this into our pricing. Trade discounts may be available for bulk quantities on some products.

We also offer quantity discounts on some products on our website.

You can order on our website for delivery to the UK (Including Northern Ireland), Isle of Man, Jersey, Guernsey and the Republic of Ireland.

We can ship many items to the EU and other countries worldwide. Our dealer agreements may prevent us sending some items to certain countries.

Please contact us for a quotation if you need something shipped to a country not offered at checkout.

Please see our Returns page for information on our returns policy and to start a return online.

Generally if you change your mind you can return your item for a full refund within 30 days of delivery (14 days for business customers) - as long as the product is unopened and unused.

If an item is faulty or damaged we will arrange collection free of charge and repair/replace it as quickly as possible.

Estimated delivery times are shown on the product page. For items in stock we aim to get your order to you within 1 - 2 working days.

Some items are ordered directly from the manufacturer. These may have longer lead times which will be estimated on the product page. Please contact us for a more accurate lead time.

Yes. We have a trade counter near Wembley Stadium, London. Many of our most popular items are stocked here for immediate collection.

Stock availability is shown on every product page and is updated in real time. Items not stocked at our Wembley branch can usually be collected next day.

We're currently not able to offer an installation service due to the rapid growth of Stage Supply.

We hope to be able to offer this service again in the future.

We use Royal Mail for smaller items, FedEx and Parcelforce for larger items and The Pallet Network for Pallet delivery items.

Tracking for your order is provided on dispatch.