Ecler HUB1616 16x16 Digital Zone Mixer with DSP

Product code: 195303

£1,371.00 inc VAT
£1,142.50 ex VAT

SKU: ECL0074

1 in stock

1 available online
FREE delivery by WednesdayOrder by 3pm tomorrow
Click & Collect Tuesday ›Collect from us in Wembley
VisaMastercardAmerican ExpressApple PayGoogle PayPayPalPayPal Credit
1 Year Manufacturer Warranty Included

About this Product

The Ecler HUB1616 is a 2U digital zone mixer with 16 inputs and 16 zone outputs and built-in DSP, replacing the eMIMO1616. It takes 4 line sources, 4 mic/line inputs with phantom power and 8 remote inputs from Ecler wall panels, and is set up from a web browser. It suits larger multi-zone background music and paging systems in hotels, bars, restaurants, retail, gyms, offices and schools.

16 x 16
Inputs x zones
8
Wall controllers
2
Paging stations
2U
Rack height
Remote inputsThe 8 remote inputs are balanced mono line-level inputs on the RJ-45 REMOTE ports, which also power and control eMCONTROL1 wall controllers. A paired WPa audio panel such as WPaMIX-T feeds its audio through the eMCONTROL1 over the same CAT5 cable, or a balanced line source can be wired straight to RJ-45 pins 1 to 3.

Features

4 line inputs (RCA, inputs 1 and 2 also on Euroblock), 4 balanced mic/line inputs with 48V phantom, 8 remote inputs on RJ-45
16 balanced line outputs on Euroblock
Configured from HANGAR, a web application built into the unit, using a standard browser
Per-zone control of source, volume, mute and 3-band tone, also from the front-panel LCD and rotary encoder
Up to 8 eMCONTROL1 wall controllers and up to 2 eMPAGE paging stations
End-user control from the Ecler Pilot app for Android and iOS
Four priority levels with ducking and paging
DSP including 8-band graphic EQ, crossover filters, delay, compressor/limiter and frequency shifter
Third-party control with TP-NET over RS-232 (DB9) or UDP
Mute input for a dry contact acting on selected outputs; headphone monitor for any of the 16 outputs

Specifications

Ecler HUB1616 16×16 Digital Zone Mixer with DSP specifications
Inputs 4 line (RCA, unbalanced), 4 mic/line (Euroblock, balanced), 8 remote (RJ-45, balanced)
Outputs 16 line, 3-pin Euroblock, balanced
Input sensitivity Line: +5 to -15 dBV; mic/line: 0 to -50 dBV; remote: 0 dBV
Phantom power +48V DC on mic/line inputs (rear switch)
Maximum input and output level 12 dBV
Converters 24-bit, 48 kHz; dynamic range AD 111 dB, DA 115 dB
DSP 32/64-bit floating point, latency <1.5 ms
Frequency response <10 Hz to 20 kHz (+0 / -0.5 dB)
THD+N <0.005% (1 kHz, 1 Vrms)
Crosstalk >90 dB (20 Hz to 20 kHz)
Control Ethernet RJ-45, RS-232 (DB9), RS-485 remote bus, mute input
Auxiliary DC output +12V DC, 0.6A max
Power 100 to 240V AC, IEC C14; 20W
Dimensions (W x H x D) 482.6 x 88 x 200 mm, 2U rack
Weight 3.66 kg

Full features

  • 16 inputs, 16 outputs digital zoner with integrated DSP
  • Easy programming and control by embedded web application, HANGAR, and standard web browser
  • Control from the front panel and user remote control by: eMCONTROL1 wall panels (up to 8) / eMPAGE paging consoles (up to 2) / Ecler pilot application, compatible with Android and iOS:control graphic panels set to user needs (pilot panels) / TP-NET protocol (RS-232 interface with DB9 connector)for control and integrating with third party systems
  • Control available, by zone (output): selection of audiosource (input), volume adjustment and MUTE, 3 band tone adjustment and general volume
  • Four priority levels, ducker/pager functions
  • Available DSP: frequency shifter, link stereo, delay,crossover filters, 8-band graphic EQ, compressor/limiterand much more
  • Predefined setups for a quick installation (plug and play)
  • MUTE port can be activated by closing the external dry contact, affecting programmed outputs to this effect

Digital Engine

  • Processor: Floating point 32/64bit

Audio Converters

  • Sampling rate: 48kHz
  • Resolution: 24 bit, AKM
  • Latency: <1.5 ms
  • Frequency response: <10Hz ~ 20kHz (+0dB / -0.5dB)
  • Dynamic range: AD:111dB, DA: 115dB

Analogue Audio Input Ports

  • Number of input ports: 4 (IN1-4), Line
    4 (IN5-8), Mic/Line
    8 (IN9-16), Remote
  • Connection type: Line: RCA female. Input 1 and 2 with Euroblock stack, Unbalanced
    Mic/Line: Euroblock (Symmetrical), Balanced
    Remote: RJ45 Connector, Balanced
  • Input sensitivity: Line: +5 / -15dBV External potentiometer adjust
    Mic/Line: +0 / -50dBV External potentiometer adjustment
    Remote: 0 dBV without adjustment
  • Input impedance: Line: >13kΩ
    Mic/Line: >24kΩ electronically balanced
    Remote: >24kΩ electronically balanced
  • Max input level: 12dBV
  • THD + Noise: < 0.005% (1kHz, 1Vrms)
  • CMRR: Mic/Line: >60dB (20Hz - 20kHz)
    Remote: >60dB (20Hz - 20kHz)
  • Phantom power: Mic/Line: +48VDC (rear panel switch)

Analogue Audio Output Ports

  • Number of output ports: 16, Line
  • Connection type: Euroblock, 3-pin, Balanced
  • Max output level: 12dBV
  • Crosstalk: >90dB, 20Hz - 20kHz

Analogue Monitor Ports

  • Headphones: From Out1 to Out16 selectable,  Mini-Jack 3,5mm (>200mW – 200Ω)

Connectivity

  • Ethernet: 1, RJ-45
    Ethernet Base-Tx 10/100Mb Auto X-Over CAT5 up to 100m
  • Serial port: RS-232 interface with DB9 connector
  • Programing and control: Hangar (embedded web application), Ecler pilot (Android/iOS application), TPNET (UDP/RS232)

Remote Control Connections

  • Digital remote controls : Remote bus, RS485
  • GPIs: 1, MUTE port

Electrical

  • Secondary power supply: +12VDC, 0,6A max. (short circuit protected)
  • AC mains requirement: 100-240 VAC @ 50-60Hz
  • AC mains connector: C14 IEC connector
  • Power consumption: 20W

Physical

  • Operating temperature: Min: -10°C ; 14°F
    Max: 40°C ; 104°F
  • Operating humidity: <85% HR
  • Storage temperature: Min: -10°C ; 14°F
    Max: 40°C ; 104°F
  • Storage humidity: <90% HR
  • Installation options: 19" rack format (2RU)
  • Optional accessories: eMCONTROL1-type physical wall panels, eMPAGE-type paging stations, WPaMIX-T, WPaBT
  • Dimensions: 482.6 x 88.0 x 200.0mm / 19.0 x 3.5 x 7.9 in. (WxHxD)
  • Weight: 3.66kg / 8.07 lb
  • Shipping dimensions: 550 x 120 x 390mm / 21.65 x 4.72 x 15.35 in. (WxHxD)
  • Shipping weight: 5.66kg / 12.48 lb

Product Reviews

No reviews yet — be the first to review this product.

Similar Products

Frequently Asked Questions

We’re a working touring and events production company founded in 2019 by sound engineers with many years of experience. 

We’re very selective about the products we sell. Everything we supply we use ourselves on our tours, events and productions. This means we can offer a level of buying advice and aftersales support that can’t be beaten.

We’re official dealers of brands such as Allen & Heath, Audio Technica and sE Electronics. We also stock other leading brands including Shure, Sennheiser, Martin Audio and Chauvet Professional.

We accept Visa, Mastercard, American Express, Apple Pay, Google Pay and Paypal. We also offer finance through Paypal Credit and Klarna.

Business Customers can choose to receive a Proforma Invoice on checkout to pay by bank transfer.

Yes. We run an AV production business and have AV Engineers on hand to provide advice and technical support during our operating hours.

The quickest way to contact us for advice and support is through WhatsApp or Email.

Many of our customers are trade/industry buyers and we have already factored this into our pricing. Trade discounts may be available for bulk quantities on some products.

We also offer quantity discounts on some products on our website.

You can order on our website for delivery to the UK (Including Northern Ireland), Isle of Man, Jersey, Guernsey and the Republic of Ireland.

We can ship many items to the EU and other countries worldwide. Our dealer agreements may prevent us sending some items to certain countries.

Please contact us for a quotation if you need something shipped to a country not offered at checkout.

Please see our Returns page for information on our returns policy and to start a return online.

Generally if you change your mind you can return your item for a full refund within 30 days of delivery (14 days for business customers) - as long as the product is unopened and unused.

If an item is faulty or damaged we will arrange collection free of charge and repair/replace it as quickly as possible.

Estimated delivery times are shown on the product page. For items in stock we aim to get your order to you within 1 - 2 working days.

Some items are ordered directly from the manufacturer. These may have longer lead times which will be estimated on the product page. Please contact us for a more accurate lead time.

Yes. We have a trade counter near Wembley Stadium, London. Many of our most popular items are stocked here for immediate collection.

Stock availability is shown on every product page and is updated in real time. Items not stocked at our Wembley branch can usually be collected next day.

We're currently not able to offer an installation service due to the rapid growth of Stage Supply.

We hope to be able to offer this service again in the future.

We use Royal Mail for smaller items, FedEx and Parcelforce for larger items and The Pallet Network for Pallet delivery items.

Tracking for your order is provided on dispatch.