Shure UA844+SWB Antenna Distribution System with Cables 470-960 MHz
£793.29£661.07 Incl. VATExcl. VAT
Shure SM81 Cardioid Condenser Instrument Microphone
£399.46£332.88 Incl. VATExcl. VAT
Shure SM86 Cardioid Condenser Vocal Microphone
£161.84£134.87 Incl. VATExcl. VAT
SKU:
SM86
Category: Condenser
Description
The Shure SM86 is a unidirectional (cardioid) condenser vocal microphone for professional use in live performance. An extremely rugged microphone, the SM86 withstands the rigors of touring while delivering studio-quality sound. The tailored frequency response of the SM86 reproduces vocals with clarity. A cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The built-in three-point shock mount minimizes handling noise, and a two-stage pop filter reduces wind and breath “pop” noise. The SM86 is an excellent selection. For use with both stage monitors and personal in-ear monitors.
Features
- Condenser cartridge for studio quality sound
- Tailored frequency response for a clear reproduction of vocals
- Rugged construction withstands the rigors of touring sound
- Cardioid polar pattern minimizes unwanted background noise
- Excellent choice for stage monitors and personal in-ear monitors
- Built-in three-point shock mount minimizes handling noise
- Two-stage "pop" filter reduces wind and breath noise
Specs
- Type: Condenser
- Frequency Response: 50 to 18,000 Hz
- Polar Pattern: Cardioid
- Sensitivity (at 1,000 Hz): Open circuit voltage: -50 dBV/Pa (3.15 mV) (1 Pa = 94 dB SPL)
- Impedance:
- 150 Ω at 1 kHz
- Recommended minimum load impedance: 600 Ω
- Output Clipping Level: 1000 Ω load at 1,000 Hz: +3 dBV (1.41 V)
- Maximum SPL (at 1,000 Hz): 1000 Ω load (1% THD): 147 dB
- Self-Noise: 23 dB typical, A-weighted
- Dynamic Range (1000 Ω): 124 dB (maximum SPL to A-weighted noise level)
- Signal-to-Noise: Ratio 71 dB at 94 dB SPL (IEC 651)* *S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the output connector
- Power Requirements: 11 to 52 Vdc, 5.2 mA
- Case: Dark gray, enamel-painted, die-cast with a stainless steel grille
- Connector: Three-pin professional audio connector (male XLR type)
- Weight: 284 g
- Dimensions: 183 mm L x 49 mm W
Shipping & Delivery
Related products
£686.07£571.73 Incl. VATExcl. VAT
£890.01£741.68 Incl. VATExcl. VAT
£424.71£353.92 Incl. VATExcl. VAT
£153.45£127.87 Incl. VATExcl. VAT
£124.74£103.95 Incl. VATExcl. VAT
£395.01£329.18 Incl. VATExcl. VAT
£791.01£659.18 Incl. VATExcl. VAT
£760.32£633.60 Incl. VATExcl. VAT
