The Shure MXN-AMP is a networked conferencing amplifier powered entirely over PoE+ – no mains feed needed. It takes four Dante inputs plus stereo analogue, applies DSP with presets matched to every MXP loudspeaker, and drives up to four MXP speakers low-Z or eight in 70V mode. In the Microflex ecosystem it closes the loop between MXA ceiling microphones and MXP loudspeakers in Teams and Zoom rooms.
Features
Powered entirely by PoE/PoE+ – no mains supply
4 Dante inputs and 4 Dante outputs
Drives up to 4 MXP speakers low-Z or 8 in 70V mode
Onboard DSP: EQ, delay, limiter, MXP speaker presets
Configured via Shure Designer software
Shure Audio Encryption, 802.1X and secure boot
Plenum-suitable; wall, ceiling or rack mounting
NoteA low-power speech amplifier by design – sized for conferencing playback, not programme audio.
Specifications
| Power | PoE/PoE+ (48V, 25.5 W max draw) |
| Amplification | 4ch low-Z + 70V output, 14.5 W combined |
| Audio I/O | 4x Dante in, 4x Dante out, stereo 3.5mm analogue |
| Control | Shure Designer |
| Latency | 2.2 ms typical |
| Dimensions | 202 x 178 x 40 mm |
| Model | MXN-AMP |





