Rated 4.9 (130 reviews)
The Kuzar K-10 is a single-operator ground support tower system rated to 500kg at 7m. The tower hinges from a steel base via integral pivot joints and is raised with the integrated winch, then loaded with the manual hoist. Built around 30 x 30cm Kuzar truss with a 1m + 3m + 2m + 1m configuration.
7 m
Max height
500 kg
Max load · minimum 25 kg
1.68 m
Stowed height
150 kg
Tower weight
Features
500 kg SWL at 7 m
Single-operator setup using integral winch
30 x 30cm Kuzar truss with 50mm tubes and integral brake runner
1m + 3m + 2m + 1m truss configuration
Steel base with hinged pivot joints for safe erection
Anti-fall safety locks on each section
Adjustable, non-slip outrigger feet
DIN2394 steel base, 6082 T6 aluminium sections
Adaptors available for Global Truss F34PL or F34 Standard
ComplianceManufactured in Spain to the CE (2006/42/CE) machinery directive. Use only by trained riggers and within rated SWL.
Specifications
| Max height | 7 m |
| Max load | 500 kg |
| Min load | 25 kg |
| Stowed height | 1.68 m |
| Work surface | 2.29 x 2.29 m |
| Tower weight | 150 kg |
| Truss section | 30 x 30 cm Kuzar with 50 mm tubes |
| Configuration | 1m + 3m + 2m + 1m |
| Folded base footprint | 80 x 57.5 cm |
| Winch | AL-KO 901 Plus, 900 kg certified |
| Lifting cable | 6 mm diameter DIN 3060 steel, anti-torsion and anti-corrosion |
| Steel finish | Black primer with anti-rust protection, polyester powder coat |
| Levelling | Spirit level on base profile |
| Transport | Swivel wheels, 100 mm diameter |
| Paired use | 1000 kg total across two towers (500 kg each), within the truss bridge’s own load rating |
| Components | Steel base with winch and outriggers, steel lifting carriage, pulley head, 1m base truss section plus 3m, 2m and 1m truss sections, reinforcement straps |
| Standards | CE 2006/42/CE |
