sE Electronics sE6160 Microphone
£424.71£353.92 Incl. VATExcl. VAT
The sE6160 can manage SPLs up to 157dB, making it ideal for capturing loud sources like drums, amps or energetic crowds. A built-in attenuation pad offers -10dB and -20dB cut options to prevent distortion from hot signals. You can capture clean, usable audio even in aggressive recording environments.
Focused sound, reduced background
With a super-cardioid/lobar pickup pattern, the sE6160 zones in on your source and rejects sound from the sides and rear. This tight directionality helps improve clarity in uncontrolled spaces, including busy stages or outdoor sets. The result is more focused audio with less interference from your surroundings.
Onboard filters for fast tone control
The low-cut filter rolls off bass at either 80Hz or 160Hz. This helps clean up rumble, reduce footfall noise and minimise proximity effect during close miking. Alongside the attenuation pad, these filters give you simple tools to shape the mic’s response without needing extra gear or post-processing.
Durable design for reliable performance
Built with an all-metal housing and weighing just 110g, the sE6160 is designed for durability without adding weight. Its transformerless output and low-noise circuitry ensure clean, consistent recordings across different setups. The mic runs on standard 48V Phantom power and connects via a 3-pin XLR for seamless integration into most professional rigs.
Features
Captures clear sound with a hand-crafted condenser capsule
Reduces background noise with focused shotgun pickup
Handles very loud sounds with up to 157dB SPL
Lowers low-end rumble using switchable low-cut filters
Prevents signal overload with built-in attenuation pad
Connects easily with a standard 3-pin XLR output
Powered by 48V Phantom for professional setups
Built to last with a tough all-metal body
Specifications
Product Code: sE6160
Capsule: Hand-Crafted Small-Diaphragm True Condenser Capsule
Polar Patterns: Shotgun (Super-Cardioid/Lobar)
Frequency Range: 20 – 20,000 Hz
Sensitivity: 25 mV/Pa (-32 dBV)
Maximum SPL (0.5% THD): 137 / 147 / 157 dBSPL (0/10/20 dB Attenuation Pad)
Equivalent Noise Level: 13 dB(A)
Dynamic Range: 124 / 134 / 144 dB (0/10/20 dB Attenuation Pad)
Signal-To-Noise Ratio: 81 dB
Low-Cut Filter: 80 / 160 Hz, 6 dB/Oct, Switchable
Attenuation Pad: 10 / 20 dB, Switchable
Powering: 48 Volts According To IEC 61938
Electrical Impedance: 110 Ohms
Recommended Load Impedance: >1k Ohms
Current Consumption: 2.6 mA
Connectivity: 3-Pin Male XLR Connector
Dimensions: 19.6 x 250 mm (√ò x H) / 0.77 x 9.84 In. (√ò x H)
Weight: 110 g (3.88 oz.)
Related products
