Rated 4.9 (130 reviews)
The ChamSys GeNetix GN10P is the Phoenix terminal connector variant of the 10-port 1U rack node, suited to permanent installations where screw-terminal DMX connections are preferred over XLR or RJ45. All 10 ports support Art-Net, sACN, and RDM, and each can be set as a DMX input or output. It also has LTC timecode in/out, MIDI in/out, a 10Scene port, and a front-panel display and encoder for local setup. Connected to a MagicQ PC by USB-C it fully unlocks MagicQ. Power comes from PoE on network port 1 or mains via Neutrik powerCON TRUE1 (cable included).
10
DMX Ports
1U Rack
Format · 19″
Phoenix
Connectors · screw terminal
1U Rack FormatGN10 series nodes are 1U rackmount units with 10 DMX ports and two network ports. On the GN10P each DMX port is a Phoenix screw terminal rather than an XLR, so you wire DMX cable straight in. That suits fixed installations with hard-wired DMX runs, or short tails made up to a 5-pin XLR where you need a plug-in point. Suited to permanent installations where a reliable, high-density node in a standard rack is preferred over distributed wall-mount nodes.
Features
Art-Net 4 and sACN (E1.31) protocol support
Full RDM (Remote Device Management) on all ports
Configurable DMX timing, frame rate and inter-packet gap
Built-in web server for browser-based configuration
Auto-discovery from ChamSys MagicQ consoles
PoE on network port 1, or mains via powerCON TRUE1
Status LEDs per DMX port for live monitoring
Phoenix screw-terminal connectors for permanent wiring
1U 19″ rack mount format
Specifications
| DMX Ports | 10 (Phoenix terminals) |
| Format | 1U 19″ rack |
| Protocols | Art-Net 4, sACN E1.31 |
| RDM | Yes |
| Ethernet | Dual port |
