Rated 4.9 (99 reviews)
A 1m LEDJ-branded power link, Midnight Black PCE 16A T-Connect inlet/through to a Neutrik NAC3FX-W-TOP-L powerCON TRUE1 TOP fixture connector, on 1.5mm² Titanex H07RN-F. The shorter 1m run and 1.5mm² flex suit closely-spaced LED battens, uplighters and lower-draw moving heads.
1 m
LENGTH · end-to-end
1.5 mm²
CABLE · Titanex H07RN-F
16 A T-Connect
INLET · PCE Midnight Black
TRUE1 TOP
FIXTURE END · NAC3FX-W-TOP-L
Cable size noteThis cable uses 1.5mm² flex, sized for typical LED-fixture loads and shorter runs. For high-draw fixtures, long throws, or rigs that will push close to the 16 A limit, use the 2.5mm² Elumen8 versions of this cable instead.
Features
Neutrik NAC3FX-W-TOP-L powerCON TRUE1 TOP fixture connector
PCE 16A Midnight Black T-Connect with integrated pass-through
1.5mm² Titanex H07RN-F tough rubber-sheathed flex
1m suits closely-spaced LED battens and floor pars
Clear heatshrink sleeve ready for asset/ID labelling
TRUE1 TOP is breakable under load and IP65 when mated
Daisy-chains TRUE1 TOP fixtures off a single 16 A feed
LEDJ build at a more accessible price than the 2.5mm² Elumen8 line
NotepowerCON TRUE1 TOP is fully intermateable with the older non-TOP powerCON TRUE1 range and the original blue/grey powerCON. Confirm your fixtures carry the TOP variant before ordering.
Specifications
| Brand | LEDJ |
| SKU | CABL344 |
| Length | 1 m |
| Inlet end | PCE 16A Midnight Black T-Connect (in/out) |
| Fixture end | Neutrik NAC3FX-W-TOP-L powerCON TRUE1 TOP |
| Cable | 1.5 mm² Titanex H07RN-F |
| Connector rating | 16 A / 230 V AC |
