A pack of two 3-pin XLR DMX termination plugs. Fitted to the last fixture in any DMX512 chain to absorb signal reflections and stabilise data, particularly important on long lighting runs and in RF-noisy environments.
Pack
2
Terminators
Connector
3-pin XLR
Male
Standard
DMX512
USITT
Why terminate?
DMX512 is a balanced data line that can suffer from signal reflections at the chain’s far end, causing flicker, dropped channels or fixtures responding erratically. A termination plug across data+ and data- absorbs those reflections and is mandatory under the DMX512 spec.
Features
✓Two terminators per pack
✓3-pin male XLR housing
✓Eliminates DMX line reflections
✓Reduces flicker and dropped channels on long runs
✓Required for DMX512 compliance
✓Sensible to keep one in every cable bag
Note
For 5-pin DMX runs, use the 5-pin terminator (LEDJ part CABL89) instead – the pinouts are not interchangeable.
Specifications
| Manufacturer | LEDJ |
| Part number | CABL90 |
| Connector | 3-pin XLR male |
| Standard | DMX512 |
| Pack quantity | 2 |
