A multicore breakout adaptor that converts a single shielded CAT5/6/7 etherCON link into four flying 3-pin male XLR tails. Used in pairs with a matching female-end counterpart to carry up to four universes of DMX (or four channels of digital audio) down one CAT cable run — tails make patching into rack panels and floor boxes straightforward.
XLR Format
3-Pin Male
flying tails
CAT Connector
etherCON
Neutrik NE8FAH
Channels
4
per CAT run
Chassis
Steel
rugged enclosure
Use in pairs
Multicore adaptors are designed to be deployed in matched pairs at each end of the CAT run. Pair this 3-pin male tails unit with a 3-pin female counterpart to complete the link.
Features
✓
Carries up to four universes of DMX or four channels of digital audio over one CAT cable
Carries up to four universes of DMX or four channels of digital audio over one CAT cable
✓
Genuine Neutrik etherCON NE8FAH locking RJ45 socket
Genuine Neutrik etherCON NE8FAH locking RJ45 socket
✓
YS by Neutrik 3-pin male XLR connectors on flying tails
YS by Neutrik 3-pin male XLR connectors on flying tails
✓
Tail format simplifies patching into rack panels and stage boxes
Tail format simplifies patching into rack panels and stage boxes
✓
Rugged steel chassis suited to touring and hire stock
Rugged steel chassis suited to touring and hire stock
✓
Compatible with shielded CAT5, CAT6 and CAT7 cabling
Compatible with shielded CAT5, CAT6 and CAT7 cabling
Note
This is a passive copper breakout — it does not convert DMX to Art-Net or sACN. CAT cable must be shielded (FTP/STP).
Specifications
| XLR connectors | 4 x 3-pin male on flying tails |
| Network connector | Neutrik etherCON NE8FAH |
| XLR brand | YS by Neutrik |
| Channels carried | Up to 4 (DMX or digital audio) |
| Cable required | Shielded CAT5 / CAT6 / CAT7 |
| Chassis | Steel |
| Order code | CABL351 |
