The Listen Technologies LR-4200-IR is a ListenIR infrared receiver from the iDSP range, used with LT-84 transmitters. It has four selectable channels, two 3.5 mm outputs and a rechargeable lithium-ion battery giving around 8 hours of use. Venues lend them to visitors in theatres, courtrooms, council chambers, boardrooms, classrooms and places of worship.
4
Channels
8 hrs
Battery, typical
2
3.5 mm outputs
79 g
With battery
Earpiece not includedThis is the receiver only. The LR-4200-IR-P1 pack adds an LA-430 neck loop lanyard and an LA-401 ear speaker.
Features
Infrared receiver for ListenIR LT-84 systems, four selectable channels
Two 3.5 mm outputs, so a receiver can be shared
OLED display shows channel name, battery, volume and charge status
Rechargeable, field-replaceable lithium-ion battery
Micro USB for charging, setup and firmware updates with Listen iDSP software
Programmable squelch, auto-off and channel names
Worn on the neck loop lanyard or with the belt clip
Charges in the LA-381 12-unit charging tray
Specifications
| Carrier frequencies | 2.3, 2.8, 3.3, 3.8 MHz (4 selectable channels) |
| Coverage | 2,787 m² single channel with LT-84/LA-141 |
| Sensitivity | Better than 1 nW/cm² at 40 dB SNR |
| Outputs | 2x 3.5 mm, 0 dBu nominal, 16 mW max, 32 ohm |
| Frequency response | 63 Hz to 15 kHz (±3 dB) system |
| Signal-to-noise ratio | Mono >60 dB, stereo >52 dB |
| Battery | Lithium-ion, field replaceable; 8 hours typical, 2.5 hours to full charge |
| Charging | Micro USB, 5V 500 mA |
| Dimensions (H x W x D) | 96 x 50 x 17 mm (21 mm with belt clip) |
| Weight | 79.4 g with battery |
| Operating temperature | -10 to 40°C |





