Titanex H07RN-F 16mm² 3-core heavy-duty rubber cable on a 50m drum. Sized for high-current single-phase feeds typically up to 80A, the convenient short-run size for stage left/right distro tails, audio mains drops and 63A extensions.
3 core
CONDUCTORS · L, N, E, 16mm²
~84A
CURRENT (in air) · single circuit
450 / 750V
VOLTAGE · U0/U rated
50m
DRUM LENGTH · single coil
Sizing rationaleStepping up from 10mm² to 16mm² gives substantial headroom for 63A feeds run over 50m+ where volt-drop becomes the limiting factor, or supports up to 80A circuits where the protection device is rated accordingly. Always derate for ambient temperature and grouping in line with BS 7671.
Features
Class 5 fine-stranded copper conductors for repeated flexing
EPR (ethylene propylene rubber) insulation
Polychloroprene (CR) outer sheath, oil and abrasion resistant
UV stable for outdoor festival and event use
Suitable for direct laying on the ground without protection
Resistant to most oils, acids and chemicals
HAR-approved to EN 50525-2-21 / HD 22.4
Hand-handleable 50m drum size for short stage runs
Specifications
| Cable type | H07RN-F |
| Conductor cross-section | 16mm² |
| Number of cores | 3 (L + N + E) |
| Conductor class | Class 5 (fine wire), bare copper |
| Insulation | EPR rubber (EI4) |
| Sheath | Polychloroprene rubber (EM2) |
| Voltage rating | 450 / 750V (U0/U) |
| Test voltage | 2,500V |
| Temperature range (flexing) | -25°C to +60°C |
| Standards | EN 50525-2-21, HD 22.4 S4, VDE 0282-4 |
| Drum length | 50m |
| SKU | CABL334 |





