A 1m IP-rated DMX adapter cable from LEDJ that bridges the Hydralock connector system used on Spectra and Fresco exterior fixtures with standard 5-pin XLR DMX equipment. The short length suits patching between adjacent fixtures or breaking out from a Hydralock chain to a 5-pin XLR console at the desk.
LENGTH
1m
Short patch
CONNECTORS
Hydralock M
to Seetronic IP 5-pin F
RATING
IP-rated
Sealed connectors
PROTOCOL
DMX512
5-pin standard
Adapter cable
Use this cable to interface a Hydralock-equipped LEDJ fixture chain with a standard 5-pin XLR DMX console, control system, or fixture. Both connectors carry additional internal seals to resist moisture ingress.
Features
✓
Bridges Hydralock fixtures and standard 5-pin XLR equipment
Bridges Hydralock fixtures and standard 5-pin XLR equipment
✓
Seetronic IP 5-pin XLR connector with internal seals
Seetronic IP 5-pin XLR connector with internal seals
✓
Suitable for exterior and damp-environment installations
Suitable for exterior and damp-environment installations
✓
Compatible with LEDJ Spectra and Fresco IP fixture ranges
Compatible with LEDJ Spectra and Fresco IP fixture ranges
✓
Hydralock male to Seetronic IP 5-pin female pinout
Hydralock male to Seetronic IP 5-pin female pinout
✓
1m length for short patches between adjacent fixtures
1m length for short patches between adjacent fixtures
Note
If the Seetronic IP connector is mated with a standard non-IP XLR, the IP65 rating at that joint is not maintained.
Specifications
| Brand | LEDJ |
| SKU | CABL536 |
| Length | 1m |
| Connector A | Hydralock male |
| Connector B | Seetronic IP 5-pin XLR female |
| Protocol | DMX512 |
| Compatibility | LEDJ Spectra and Fresco IP fixtures |











