A 3m touring-grade power link from Elumen8 — Midnight Black PCE 16A T-Connect inlet/through to a Neutrik powerCON TRUE1 TOP fixture connector — on 2.5mm² Titanex H07RN-F. The 3m run gives extra reach for higher truss heights, off-axis fixture positions and longer drops between adjacent battens.
LENGTH
3 m
end-to-end
CABLE
2.5 mm²
Titanex H07RN-F
RATING
16 A
230 V AC
FIXTURE END
TRUE1 TOP
NAC3FX-W-TOP-L
PCE T-Connect
The Midnight Black T-Connect houses both an inlet and a pass-through outlet in one moulded body, so cables daisy-chain head-to-tail with no external splitter. Useful for tour rigs where part counts on the truck sheet matter as much as run length.
Features
✓Neutrik NAC3FX-W-TOP-L powerCON TRUE1 TOP fixture connector
✓PCE 16A Midnight Black T-Connect with integrated pass-through
✓2.5mm² Titanex H07RN-F tough rubber-sheathed flex
✓3m suits taller truss heights and offset fixture positions
✓Clear heatshrink sleeve ready for asset/ID labelling
✓TRUE1 TOP is breakable under load and IP65 when mated
✓Touring-grade build for hire stock and repeat installs
✓Daisy-chains TRUE1 TOP fixtures off a single 16 A circuit
Note
powerCON TRUE1 TOP (NAC3) is mechanically incompatible with the older non-TOP TRUE1 (NAC3-X) and the original blue/grey powerCON. Confirm your fixtures carry the TOP variant before ordering.
Specifications
| Brand | Elumen8 |
| SKU | CABL667 |
| Length | 3 m |
| Inlet end | PCE 16A Midnight Black T-Connect (in/out) |
| Fixture end | Neutrik NAC3FX-W-TOP-L powerCON TRUE1 TOP |
| Cable | 2.5 mm² Titanex H07RN-F |
| Rating | 16 A / 230 V AC |
