Rated 4.9 (120 reviews)
A 0.5m balanced lead from Elumen8, terminated with a 3-pole 6.35mm (1/4″) TRS jack at one end and a 3-pin NC3FXX female XLR at the other. Half a metre is the practical length for taking an XLR output into a jack input a few U away in the same rack, without the loose loop you get from a 1m lead.
0.5m
LENGTH · Short hop
2 x 0.51mm²
CONDUCTORS · 20AWG
90%
SCREEN · Braided tinned copper
6mm
CABLE OD · PVC jacket
Features
0.5m finished length for tidy in-rack XLR to jack links
3-pole 6.35mm (1/4″) TRS jack to 3-pin NC3FXX female XLR, balanced throughout
Neutrik connectors
Braided tinned copper screen with 90% coverage
Super flexible PVC outer jacket with cotton stuffing
Clear heatshrink at each end for asset labelling or ID
Heat resistant construction
Made in Britain
NoteThis is the female XLR variant, so it takes a feed out of an XLR output. If you need to feed an XLR input from a jack output, order the male XLR version instead.
Specifications
| Length | 0.5m |
| Connector A | 3-pole 6.35mm (1/4″) TRS jack |
| Connector B | 3-pin NC3FXX female XLR |
| Conductors | 2 x 0.51mm² (20AWG) |
| Screen | Braided tinned copper, 90% coverage |
| Outer diameter | 6mm |
| Jacket | Super flexible PVC, cotton stuffed |
| Colour | Silver |
| SKU | CABL2531 |
