Rated 4.9 (130 reviews)
The ChamSys GeNetix GN8 is an 8-port Ethernet-to-DMX node for Art-Net and sACN, suited to large installed and touring rigs requiring high port density from a single network node. All 8 ports are DMX outputs with full RDM support (output only; for DMX input choose a GN10-series node). It is mains powered via Neutrik powerCON TRUE1 (110-240V AC, cable included), with a powerCON TRUE1 link-out to daisy-chain power. A 1U 19″ unit with one network port, it fits a rack with its ears or hangs on truss via its M12 receiver, and a front-panel display and encoder let you set it up locally. It does not unlock MagicQ PC.
8
DMX Ports
Art-Net 4
Protocols · sACN E1.31
Mains
Power · powerCON TRUE1
Art-Net and sACNAll GeNetix GN nodes support both Art-Net and sACN (E1.31) protocols and are fully RDM-compliant. Configuration is via the built-in web server or directly from ChamSys MagicQ consoles via network discovery, no separate node management software required.
Features
Art-Net 4 and sACN (E1.31) protocol support
Full RDM (Remote Device Management) on all ports
Configurable DMX timing, frame rate and inter-packet gap
Built-in web server for browser-based configuration
Auto-discovery from ChamSys MagicQ consoles
Mains powered via powerCON TRUE1, with link-out
Status LEDs per DMX port for live monitoring
Specifications
| DMX Ports | 8 outputs (RDM) |
| Protocols | Art-Net 4, sACN E1.31 |
| RDM | Yes |
| Power | Mains, powerCON TRUE1 in and link-out |
| Config | Web browser / MagicQ auto-discovery |
