Lab Gruppen E 40:4 Energy Efficient Class-D Amplifier 4×1000W 19″ 1U

Product code: 180369

£1,757.00 inc VAT
£1,464.17 ex VAT

SKU: 000-D5L01-00010

3 in stock

In stock with Lab Gruppen - ordered on demand
FREE delivery by ThursdayOrder by 3pm tomorrow
Click & Collect Wednesday ›Collect from us in Wembley
VisaMastercardAmerican ExpressApple PayGoogle PayPayPalPayPal Credit
1 Year Manufacturer Warranty Included

About this Product

The Lab Gruppen E 40:4 delivers 4 × 1,000 W, 4,000 W in total, from a single rack unit for installed sound. Built on the IDEEA Class-D platform with the Rail Sense Limiter, each channel runs Lo-Z loads down to 2 Ω or Hi-Z 70 V / 100 V constant-voltage lines, and asymmetric loading lets you mix subs, full-range pairs and long distributed ceiling runs across the four channels of one chassis. High efficiency keeps mains draw and heat low, easing demands on the installation’s power distribution and cooling.

4 × 1,000 W
Output power
4,000 W
Total output
2 Ω-100 V
Lo-Z and Hi-Z
1U
19″ rack, 7.9 kg

Features

4,000 W across 4 flexible output channels in a 1U form factor
4 × 900 W into 2 Ω; 4 × 1,000 W into 4 Ω, 8 Ω, 70 V or 100 V; 4 × 625 W into 16 Ω
Asymmetric channel loading mixes different impedances on one amplifier
Proprietary IDEEA Class-D output stage
Rail Sense Limiter (RSL) greatly reduces signal clipping and simplifies configuration
Low power consumption and heat generation ease demands on mains and cooling
Auto-standby and auto-power-on cut consumption in non-operating cycles
Built-in 50 Hz high-pass filter, switchable per channel on the rear panel
Per-channel attenuation knob and signal LED on the rear panel for commissioning
Temperature-controlled fan with front-to-back airflow
Aluminium front panel with power, temperature and per-channel signal/limit LEDs
GPIO connector with power control and indication for system integration
Balanced analogue inputs and amplifier outputs on detachable screw terminals
Comprehensive fail-safe circuit protection

Specifications

Lab Gruppen E 40:4 Energy Efficient Class-D Amplifier 4×1000W 19″ 1U specifications
Amplifier channels 4
Total output, all channels driven 4,000 W
Output per channel 900 W into 2 Ω; 1,000 W into 4 Ω, 8 Ω, 70 V or 100 V; 625 W into 16 Ω
Max output voltage per channel 141 Vp / 100 Vrms
Max output current per channel 21.2 Arms
THD (20 Hz – 20 kHz @ 1 W into 8 Ω) <0.1%
THD (@ 1 kHz, 1 dB below clipping) <0.05%
Signal-to-noise ratio >106 dBA
Channel separation @ 1 kHz >70 dB
Frequency response 2 Hz – 40 kHz
Input impedance 20 kΩ
Common mode rejection 50 dB
Output impedance 25 mΩ
Mains 100-240 VAC, standard IEC receptacle
Power consumption 1,000 W
Standby consumption <2.5 W
Dimensions (H × W × D) 44 × 483 × 417 mm (1U, 19″)
Weight 7.9 kg
Finish Dark grey aluminium front, black steel chassis
Warranty 1 year

Full features

  • 4,000 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient for supreme green credentials and exceptionally low lifetime running costs
  • 4 x 900 Watts into 2 Ohms, 4 x 1,000 Watts into 4 Ohms, 4 x 1,000 Watts into 8 Ohms, 4 x 625 Watts into 16 Ohms, 4 x 1,000 Watts into Hi-Z 70 V, 4 x 1,000 Watts into Hi-Z 100 V
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power on reduces power consumption in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per-channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fan with front to back airflow
  • Aluminium front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analogue inputs and amplifier outputs on detachable screw terminals

Full specifications

General

  • Number of powered channels: 4
  • Total output all channels driven: 4000 W
  • Max output voltage per channel: 141 Vp / 100 Vrms
  • Max output current per channel: 21.2 Arms
  • Asymmetric load operation: Units are capable of delivering extra power to one channel while sending significantly less to the other

Performance

  • THD (20 Hz - 20 kHz @ 1 W into 8 Ω): <0.1%
  • THD @ 1 kHz, 1 dB below clipping: <0.05%
  • Signal-to-noise ratio: >106 dBA
  • Channel separation (crosstalk) @ 1 kHz: >70 dB
  • Frequency response: 2 Hz - 40 kHz
  • Input impedance: 20 kΩ
  • Input common mode rejection, CMR: 50 dB
  • Output impedance: 25 mΩ

Power

  • Nominal voltage: 100 - 240 VAC
  • Power consumption: 1000 W
  • Standby consumption: <2.5 W
  • Mains connector: Standard IEC receptacle

Physical & Dimensions

  • Dimensions (HWD): 44 x 483 x 417 mm (1.7 x 19 x 16.4")
  • Weight: 7.9 kg (17.4 lbs)
  • Finish: Dark grey aluminium front and black steel chassis
Compare the Range
Lab Gruppen E 40:4 Energy Efficient Class-D Amplifier 4×1000W 19″ 1U
Lab Gruppen E 40:4 Energy Efficient Class-D Amplifier 4×1000W 19″ 1U
£1,757.00 inc VAT
£1,464.17 ex VAT
  • Amplifier channels: 4
  • Signal-to-noise ratio: >106 dBA
  • Mains: 100-240 VAC, standard IEC receptacle
  • Standby consumption: <2.5 W
  • Weight: 7.9 kg
Viewing Now
Lab Gruppen E2:2 Energy Efficient Class-D Amplifier 2×100W 19″ 1U
£536.00 inc VAT
£446.67 ex VAT
  • Amplifier channels: 2
  • Signal-to-noise ratio: >112 dBA
  • Standby consumption: <1 W
  • Weight: 4.2 kg
View →
Lab Gruppen E4:2 Energy Efficient Class-D Amplifier 2×200W 19″ 1U
£628.00 inc VAT
£523.33 ex VAT
  • Amplifier channels: 2
  • Signal-to-noise ratio: >112 dBA
  • Standby consumption: <1 W
  • Weight: 4.2 kg
View →
Lab Gruppen E8:2 Energy Efficient Class-D Amplifier 2×400W 19″ 1U
£721.00 inc VAT
£600.83 ex VAT
  • Amplifier channels: 2
  • Signal-to-noise ratio: >112 dBA
  • Standby consumption: <1 W
  • Weight: 4.2 kg
View →
Lab Gruppen E 20:4 Energy Efficient Class-D Amplifier 4×500W 19″ 1U
£1,572.00 inc VAT
£1,310.00 ex VAT
  • Amplifier channels: 4
  • Signal-to-noise ratio: >106 dBA
  • Mains: 100-240 VAC, standard IEC receptacle
  • Standby consumption: <2.5 W
  • Weight: 7.9 kg
View →
Lab Gruppen E10:4 Energy Efficient Class-D Amplifier 4×250W 19″ 1U
£1,202.00 inc VAT
£1,001.67 ex VAT
  • Amplifier channels: 4
  • Signal-to-noise ratio: >112 dBA
  • Standby consumption: <1 W
  • Weight: 6.2 kg
View →
Lab Gruppen E12:2 Energy Efficient Class-D Amplifier 2×600W 19″ 1U
£813.00 inc VAT
£677.50 ex VAT
  • Amplifier channels: 2
  • Signal-to-noise ratio: >112 dBA
  • Standby consumption: <1 W
  • Weight: 4.2 kg
View →

Product Reviews

No reviews yet — be the first to review this product.

Similar Products

Frequently Asked Questions

We’re a working touring and events production company founded in 2019 by sound engineers with many years of experience. 

We’re very selective about the products we sell. Everything we supply we use ourselves on our tours, events and productions. This means we can offer a level of buying advice and aftersales support that can’t be beaten.

We’re official dealers of brands such as Allen & Heath, Audio Technica and sE Electronics. We also stock other leading brands including Shure, Sennheiser, Martin Audio and Chauvet Professional.

We accept Visa, Mastercard, American Express, Apple Pay, Google Pay and Paypal. We also offer finance through Paypal Credit and Klarna.

Business Customers can choose to receive a Proforma Invoice on checkout to pay by bank transfer.

Yes. We run an AV production business and have AV Engineers on hand to provide advice and technical support during our operating hours.

The quickest way to contact us for advice and support is through WhatsApp or Email.

Many of our customers are trade/industry buyers and we have already factored this into our pricing. Trade discounts may be available for bulk quantities on some products.

We also offer quantity discounts on some products on our website.

You can order on our website for delivery to the UK (Including Northern Ireland), Isle of Man, Jersey, Guernsey and the Republic of Ireland.

We can ship many items to the EU and other countries worldwide. Our dealer agreements may prevent us sending some items to certain countries.

Please contact us for a quotation if you need something shipped to a country not offered at checkout.

Please see our Returns page for information on our returns policy and to start a return online.

Generally if you change your mind you can return your item for a full refund within 30 days of delivery (14 days for business customers) - as long as the product is unopened and unused.

If an item is faulty or damaged we will arrange collection free of charge and repair/replace it as quickly as possible.

Estimated delivery times are shown on the product page. For items in stock we aim to get your order to you within 1 - 2 working days.

Some items are ordered directly from the manufacturer. These may have longer lead times which will be estimated on the product page. Please contact us for a more accurate lead time.

Yes. We have a trade counter near Wembley Stadium, London. Many of our most popular items are stocked here for immediate collection.

Stock availability is shown on every product page and is updated in real time. Items not stocked at our Wembley branch can usually be collected next day.

We're currently not able to offer an installation service due to the rapid growth of Stage Supply.

We hope to be able to offer this service again in the future.

We use Royal Mail for smaller items, FedEx and Parcelforce for larger items and The Pallet Network for Pallet delivery items.

Tracking for your order is provided on dispatch.