The Dynacord VZX-8 is an eight-zone audio processor with a full matrix DSP for music, paging and messaging in commercial installations. It has 8 mic/line inputs, 4 RCA pairs, built-in media and message players, 8 zone outputs and accessory ports for VCS-8 call stations and VWP wall panels. It is set up through a browser-based web app with no software to install, and suits bars, restaurants, retail, hotels, schools and houses of worship.
8 zones
Line outputs
20
Processed sources
Web app
Set-up
1U
Rack height
Paging and wall control sold separatelyVCS-8 call stations and VWP wall panels connect to the two RJ45 accessory ports (up to 16 devices, 8 call stations maximum). Amplification is separate: the RJ45 line outputs connect directly to Dynacord V Series amplifiers.
Features
8 balanced mic/line inputs on Euroblock, 0 to 60 dB gain, switchable 48V phantom per input
4 RCA input pairs (summed mono, or paired as stereo)
Media player and message player from the included 32 GB microSD card (8 mono or 4 stereo sources)
8 zone line outputs on Euroblock, mirrored on 2x RJ45 for direct connection to V Series amplifiers (AES72-1E)
Input processing: high-pass, 4-band EQ, gate, compressor, AGC and VOX ducker
Virtual mixer with automixer and effects for live use in any zone
Output room EQ, speaker EQ with FIR filter, crossover, ambient noise compensation, limiters and up to 150 ms delay
Speaker presets from EV and Dynacord loudspeaker databases, plus SONICUE database import
8 GPIO and an EMG override input
Configured from any browser via ZeroConf address; OCA and JSON RPC for control integration
Specifications
| Inputs | 8x mic/line (Euroblock), 4x RCA pairs, 1x EMG |
| Outputs | 8x balanced line (Euroblock), 2x RJ45 line out (zones 1 to 4, 5 to 8) |
| Maximum input/output level | +18 dBu |
| THD+N | <0.003% (0 dBu, 1 kHz) |
| Signal-to-noise ratio | >110 dB analogue in to out (A-weighted) |
| Equivalent input noise | <-125 dB (A-weighted) |
| Sample rate | 48 kHz |
| Storage | 300 MB internal, 32 GB microSD included |
| Accessory ports | 2x RJ45, up to 8 devices and 500 m per port |
| GPIO | 8, assignable as analogue in, digital in or digital out; ready/fault relay |
| Network | 1x RJ45, 100/1000 Mbit; TCP/IP, HTTP(S), JSON RPC, WebSocket, OCA |
| Power | 100 to 240 V AC, 50/60 Hz, 55W max |
| Dimensions (W x H x D) | 483 x 44.2 x 269.5 mm with rack ears, 1U |
| Weight | 3.58 kg |





