Rated 4.9 (120 reviews)
The Ecler ARQIS SB10i is a passive 10 inch installation subwoofer in an MDF cabinet, rated at 150W RMS at 8 ohms, with an internal low-pass filter offering two settings. It comes with a wall bracket and has 12 M8 rigging points, so it can be wall mounted as well as floor standing. It adds bass to ARQIS i series systems in bars, restaurants, hotel lounges and retail. Sold as a single unit in black.
10in
Subwoofer
150W
RMS at 8 ohms
54 Hz
Low frequency (-10 dB)
Bracket
Included
8 ohm onlyNo line transformer: drive from a low-impedance amplifier output. Ecler recommends a 60 Hz high-pass protection filter.
Features
Single 10 inch woofer
150W RMS, 600W peak at 8 ohms
Internal low-pass filter with two frequency settings
Euroblock connector and spring-loaded terminals
Wall bracket included; 12 x M8 rigging points
MDF cabinet with steel grille
Black finish (RAL 9005)
Specifications
| Frequency range | 54 Hz to 4 kHz (-10 dB) |
| Power handling | 150W RMS, 600W peak |
| Nominal impedance | 8 ohms |
| Sensitivity | 92 dB (1W/1m) |
| Maximum SPL | 114 dB continuous, 120 dB peak |
| Recommended amplifier | 300W RMS |
| Recommended high-pass | 60 Hz, 12 dB/octave minimum |
| Connection | 1 x Euroblock, 1 x spring terminal |
| Rigging points | 12 x M8 |
| Environmental | IP31 |
| Dimensions (W x H x D) | 600 x 442 x 228 mm |
| Weight | 16.5 kg |
| Included | Wall bracket, 4 rubber feet, 4 screws |
| Operating temperature | -20°C to 70°C |
| Colour | Black (RAL 9005) |
