About DMX Controllers: Fader Desks, App & Install Controllers
DMX controllers for rigs that do not need a full lighting console: fader desks and scene setters, fixture controllers with 192 to 512 channels, LED colour controllers, app and software interfaces, standalone show controllers, and wall and DIN rail controllers for installs. Brands include ADJ, Chauvet DJ, Wolfmix, LEDJ, QTX, Transcension, ChamSys GeNetix and Nicolaudie Architectural.
Fader desks and scene setters such as the ADJ SDC-6 and SDC24, the ADJ Scene Setter 24 and the LEDJ Scene Director 24 and 48 give one fader per channel, the quickest way to set levels on dimmers and simple fixtures. Fixture controllers group channels by fixture and store scenes and chases: the ADJ DMX Operator 192 runs 12 fixtures and the DMX Operator 384 doubles the channel count, the Chauvet DJ Obey 40 handles 12 fixtures at 16 channels and the Obey 70 twelve 32-channel fixtures with a joystick for movement, and the QTX ADMX-512 covers a full universe as 32 fixtures of up to 18 channels. LED colour controllers such as the LEDJ EasiLED 4 and VersiLED 6 set colours directly on RGB to RGBWAUV fixtures with no programming.
App and software control: ADJ mydmx GO runs from an iPad or Android tablet over Wi-Fi, ADJ Link gives four universes from the Airstream LINK iPad app, ADJ myDMX5 pairs timeline software with its own interface hardware, and the Chauvet DJ XPRESS 512S runs ShowXpress software and stores a show for playback with no computer attached. The Wolfmix W1 MK3 is a standalone performance controller that follows the music from its microphone, line input or tap tempo, with two universes as standard and two more as a paid upgrade. For installs, Nicolaudie Architectural DINA DIN rail controllers and STICK wall controllers run scenes without a computer (the DINA-DR2-LITE triggers them by clock, contact closure or app), and the ChamSys GeNetix 10Scene Store recalls ten scenes from up to ten 10Scene wall plates on one universe.
How to choose. Count channels first: add up the DMX mode of every fixture, then compare it with the controller’s channel and fixture limits, because a 192 channel controller fills quickly once moving heads arrive. Decide who will operate it, as a fader desk suits a technician, a fixture controller suits a mobile DJ or band, and a wall plate suits venue staff who only need to press a button. Check whether the show must play back with no laptop connected, and whether the controller has 3-pin or 5-pin DMX for your fixtures; DMX adaptors and terminators covers the difference. When the rig outgrows a controller, Lighting Desks & Consoles take over, and DMX Distribution has the splitters, nodes and wireless DMX to spread the signal. Mobile DJ lighting control compares sound-active, remotes, apps and simple controllers.
DMX Controllers FAQs
How many channels does my DMX controller need? Add up the channels each fixture uses in the DMX mode you will run it. A 192 channel controller such as the Chauvet DJ Obey 40 or ADJ DMX Operator handles 12 fixtures at up to 16 channels each; 384 and 512 channel controllers handle larger or more complex fixtures; and one DMX universe is 512 channels.
What is the difference between a DMX controller and a lighting console? A DMX controller stores scenes and chases on a fixed number of channels. A lighting console adds fixture libraries, effects engines, cue stacks and several universes for moving lights and pixel fixtures. See Lighting Desks & Consoles.
Can I control DMX lights from a phone or tablet? Yes. ADJ mydmx GO works with iPad and Android tablets, and ADJ Link works with the Airstream LINK app on iPad; both connect over Wi-Fi to an interface that outputs DMX to the rig.
Will a DMX controller work with any brand of light? DMX512 is a common standard, so any DMX controller can drive DMX fixtures from any manufacturer once each fixture is set to its own start address. Controllers built for one system, such as the Chauvet DJ ILS Command for ILS-enabled fixtures, are the exception.
Which controller suits a venue where staff just recall scenes? A standalone install controller. Nicolaudie STICK wall controllers and DINA DIN rail units, or a ChamSys GeNetix 10Scene Store with 10Scene wall plates, are programmed once and then recall scenes from buttons or schedules.
New to DMX? Addressing, universes and cabling from the beginning in DMX explained.













