The Lab Gruppen E 40:4 delivers 4 × 1,000 W, 4,000 W in total, from a single rack unit for installed sound. Built on the IDEEA Class-D platform with the Rail Sense Limiter, each channel runs Lo-Z loads down to 2 Ω or Hi-Z 70 V / 100 V constant-voltage lines, and asymmetric loading lets you mix subs, full-range pairs and long distributed ceiling runs across the four channels of one chassis. High efficiency keeps mains draw and heat low, easing demands on the installation’s power distribution and cooling.
4 × 1,000 W
Output power
4,000 W
Total output
2 Ω-100 V
Lo-Z and Hi-Z
1U
19″ rack, 7.9 kg
Features
4,000 W across 4 flexible output channels in a 1U form factor
4 × 900 W into 2 Ω; 4 × 1,000 W into 4 Ω, 8 Ω, 70 V or 100 V; 4 × 625 W into 16 Ω
Asymmetric channel loading mixes different impedances on one amplifier
Proprietary IDEEA Class-D output stage
Rail Sense Limiter (RSL) greatly reduces signal clipping and simplifies configuration
Low power consumption and heat generation ease demands on mains and cooling
Auto-standby and auto-power-on cut consumption in non-operating cycles
Built-in 50 Hz high-pass filter, switchable per channel on the rear panel
Per-channel attenuation knob and signal LED on the rear panel for commissioning
Temperature-controlled fan with front-to-back airflow
Aluminium front panel with power, temperature and per-channel signal/limit LEDs
GPIO connector with power control and indication for system integration
Balanced analogue inputs and amplifier outputs on detachable screw terminals
Comprehensive fail-safe circuit protection
Specifications
| Amplifier channels | 4 |
| Total output, all channels driven | 4,000 W |
| Output per channel | 900 W into 2 Ω; 1,000 W into 4 Ω, 8 Ω, 70 V or 100 V; 625 W into 16 Ω |
| Max output voltage per channel | 141 Vp / 100 Vrms |
| Max output current per channel | 16.3 Arms |
| THD (20 Hz – 20 kHz @ 1 W into 8 Ω) | <0.1% |
| THD (@ 1 kHz, 1 dB below clipping) | <0.05% |
| Signal-to-noise ratio | >106 dBA |
| Channel separation @ 1 kHz | >70 dB |
| Frequency response | 2 Hz – 40 kHz |
| Input impedance | 20 kΩ |
| Common mode rejection | 50 dB |
| Output impedance | 25 mΩ |
| Mains | 100-240 VAC, standard IEC receptacle |
| Power consumption | 600 W |
| Standby consumption | <2.5 W |
| Dimensions (H × W × D) | 44 × 483 × 417 mm (1U, 19″) |
| Weight | 7.9 kg |
| Finish | Dark grey aluminium front, black steel chassis |
| Warranty | 1 year |





