A 10m IP-rated DMX lead from LEDJ with a Seetronic IP 5-Pin Male XLR on one end and a LEDJ Hydralock 5-Pin Female on the other. Designed to feed DMX from a standard 5-Pin XLR control source into a Hydralock-terminated outdoor fixture chain, useful as the first run between a rack/desk position and the start of a Spectra or Fresco line.
10 m
LENGTH · Run length
5-Pin XLR M / Hydralock F
CONNECTORS · Seetronic IP / LEDJ
IP-rated
PROTECTION · Sealed connectors
CABL534
SKU · LEDJ
Crossover CableUse this lead to bridge a standard 5-Pin XLR signal source, desk output, splitter, or non-IP fixture, into a LEDJ Hydralock daisy-chain. The Seetronic end mates electrically with any standard 5-Pin XLR; the Hydralock end carries the IP rating into the outdoor chain.
Features
Seetronic IP 5-Pin Male XLR with internal moisture seals
LEDJ Hydralock 5-Pin Female on opposite end
10 m length, typical first-run from control to fixture line
Cross-compatible with standard 5-Pin XLR fixtures and desks
Suited to outdoor and damp-environment use when fully mated
Flexible jacket suited to repeat get-in / get-out rigging
NoteIP integrity is only maintained when the connector is fully mated with a compatible IP-rated counterpart. Mating to a standard plastic-shell XLR will work electrically but will not seal.
Specifications
| Brand | LEDJ |
| SKU | CABL534 |
| Length | 10 m |
| Connector A | Seetronic IP 5-Pin Male XLR |
| Connector B | LEDJ Hydralock 5-Pin Female |
| Application | Outdoor / IP DMX patching, system bridging |





