Rated 4.9 (99 reviews)
A 0.5m IP-rated DMX patch lead from LEDJ with a Seetronic IP 5-Pin Male XLR on one end and a LEDJ Hydralock 5-Pin Female on the other. Designed to bridge a standard 5-Pin XLR control source, desk, splitter or non-IP fixture, into the start of a Hydralock-terminated outdoor DMX run.
0.5 m
LENGTH · Patch length
5-Pin XLR M / Hydralock F
CONNECTORS · Seetronic IP / LEDJ
IP-rated
PROTECTION · Sealed connectors
CABL530
SKU · LEDJ
Crossover CableThis is a system bridge: standard 5-Pin XLR at one end, LEDJ Hydralock at the other. Use it to feed DMX from your indoor control rig into a Hydralock daisy-chain on Spectra or Fresco IP fixtures, or to convert back to standard XLR mid-run.
Features
Seetronic IP 5-Pin Male XLR with internal moisture seals
LEDJ Hydralock 5-Pin Female on opposite end
Bridges standard 5-Pin DMX into Hydralock fixture chains
Cross-compatible with standard 5-Pin XLR fixtures and desks
Suited to outdoor and damp-environment use when fully mated
Short 0.5 m length ideal for tight patches between adjacent fixtures or rack-to-fixture jumps
NoteIP integrity is only maintained when the connector is fully mated with a compatible IP-rated counterpart. Mating to a standard plastic-shell XLR will work electrically but will not seal.
Specifications
| Brand | LEDJ |
| SKU | CABL530 |
| Length | 0.5 m |
| Connector A | Seetronic IP 5-Pin Male XLR |
| Connector B | LEDJ Hydralock 5-Pin Female |
| Application | Outdoor / IP DMX patching, system bridging |
