Rated 4.9 (120 reviews)
The Aviom RCI Remote Control Interface connects an MCS Mic Control Surface to a Pro64 network, allowing remote control of 6416m and AllFrame mic preamps from anywhere on the network. It also works as a single-channel monitor station, with a headphone output and a balanced XLR line output that can follow any network slot. It is used at FOH, monitor and broadcast positions in Pro64 snakes and audio networks.
64
Preamp channels controlled
4
Control Groups
XLR + 1/4″
Monitor outputs
1U
Rack height
Use with the MCSPreamp remote control needs an MCS Mic Control Surface (sold separately) connected to the RCI. Any number of RCIs can be fitted for multiple control points.
Pro64 systemThis is a Pro64 A-Net device. It works with other Pro64 products (6416 modules, AllFrame, MH10/MH10f, RCI/MCS). Pro16 personal mixers and Pro16 output modules connect to a Pro64 network through an ASI A-Net Systems Interface.
Features
Network interface for the MCS Mic Control Surface
One RCI and MCS control up to 64 mic preamp channels anywhere on the network
Control Groups divide control among up to four simultaneous users
Monitor any active Pro64 slot on headphones or a balanced XLR line output
Monitor selection can follow the MCS
MCS can be connected and disconnected without affecting the network
Backup DC power inlet on 4-pin XLR
Specifications
| Controller port | EtherCon RJ45, for MCS |
| Headphone output | 1/4″ TRS, mono, with level control |
| Monitor output | XLR, balanced, mono; +4 dBu or -17 dBu (pad switch) |
| A-Net | 2x EtherCon RJ45; 120 m (400 ft) between devices |
| Power | 100 to 240 V AC, 50/60 Hz, 16 W, IEC inlet |
| Backup DC power | 24 V DC, 2 A max, 4-pin XLR |
| Maximum ambient temperature | 50°C |
| Dimensions (W x D x H) | 482.6 x 203 x 44 mm, 1U |
| Weight | 3.17 kg |
