The NEXO DTDIN is a Dante-enabled digital speaker controller in the install-optimised DTD-I form factor, combining advanced crossover, EQ, time-alignment, and speaker protection processing derived from NEXO’s NXAMP technology with full Dante audio networking. Purpose-built for permanent installations with networked audio infrastructure, all connectors (except the mini-USB configuration port) sit on a rear barrier strip, and settings can be locked after commissioning — ideal for venues, conference centres, and corporate AV environments running Dante throughout the facility.
Processing
64-bit / 96kHz
High-resolution DSP
Dynamic Range
>112 dB
Analogue in to analogue out
Distortion
<0.001%
THD
Networking
Dante
Audio over IP
Dante Networking
This model includes built-in Dante audio networking, allowing the DTDIN to receive audio over a standard Ethernet network alongside analogue, AES, and USB inputs. For installed systems already running Dante infrastructure, this eliminates analogue cable runs to the processor and enables centralised routing and monitoring via Dante Controller software.
Features
✓
Built-in Dante audio networking for AoIP integration
Built-in Dante audio networking for AoIP integration
✓
All connectors on rear barrier strip — clean, tamper-resistant installation
All connectors on rear barrier strip — clean, tamper-resistant installation
✓
Lockable settings prevent accidental changes after commissioning
Lockable settings prevent accidental changes after commissioning
✓
Configuration via PC or Mac over USB — no front-panel controls to interfere with
Configuration via PC or Mac over USB — no front-panel controls to interfere with
✓
Speaker processing algorithms derived from NEXO NXAMP technology
Speaker processing algorithms derived from NEXO NXAMP technology
✓
Crossover, EQ, time-alignment, and speaker protection in a single unit
Crossover, EQ, time-alignment, and speaker protection in a single unit
✓
Linear Acoustic Phase algorithms — phase-compatible with NEXO PS, LS, and other cabinets
Linear Acoustic Phase algorithms — phase-compatible with NEXO PS, LS, and other cabinets
✓
Automatic amplifier sensing for streamlined system setup
Automatic amplifier sensing for streamlined system setup
Note
This is a speaker processor, not an amplifier — it requires external amplification to drive NEXO cabinets. The DTD-I has no front-panel controls; all configuration is performed via the mini-USB port using PC/Mac software. For the non-Dante install variant, see the DTDIU.
Specifications
| SKU | 01DTD-IN |
| Form Factor | Install (DTD-I) — compact rack-mount |
| Processing Resolution | 64-bit / 96 kHz |
| Dynamic Range | >112 dB (analogue in to analogue out) |
| Distortion | <0.001% THD |
| Analogue Inputs | Stereo balanced (rear barrier strip) |
| Digital Inputs | AES, USB (driverless audio playback), Dante |
| Analogue Outputs | Balanced — PS (stereo), LS (mono sum) |
| Configuration | PC/Mac via mini-USB (lockable settings) |
| Dante | Yes |
| Processing | Crossover, EQ, time-alignment, speaker protection |
