A 1U flat steel blanking panel for closing off unused spaces in a 19″ rack. Fitting blanks rather than leaving gaps keeps airflow moving front-to-back through the rack instead of recirculating, keeps dust and stray cable out, and gives a finished look to install racks and touring amp racks alike.
RACK SPACE
1U
19″ standard
MATERIAL
2mm
steel
WEIGHT
0.3kg
per panel
Features
✓
Covers a single 1U gap in any 19″ rack cabinet
Covers a single 1U gap in any 19″ rack cabinet
✓
2mm steel construction resists bending in transit
2mm steel construction resists bending in transit
✓
Black finish matches standard rack hardware
Black finish matches standard rack hardware
✓
Improves front-to-back cooling airflow by blocking recirculation
Improves front-to-back cooling airflow by blocking recirculation
✓
Keeps dust and debris out of open rack spaces
Keeps dust and debris out of open rack spaces
✓
Full 483mm rack width, 44mm high
Full 483mm rack width, 44mm high
✓
Light at 0.3kg, so blanking a rack adds negligible weight
Light at 0.3kg, so blanking a rack adds negligible weight
✓
Flat profile sits flush with the front of the rack
Flat profile sits flush with the front of the rack
Note
This is an unvented flat panel. If you need airflow through the panel itself rather than a solid blank, choose a vented rack panel instead.
Specifications
| Rack space | 1U |
| Dimensions (H x W x D) | 44 x 483 x 2mm |
| Material | 2mm steel |
| Finish | Black |
| Weight | 0.3kg |











