A 15m British-made hybrid cable carrying DMX signal and mains power in one outer jacket, terminated with Neutrik powerCON TRUE1-TOP and 5-Pin XLR at both ends. 15m is the useful middle length in a hybrid stock – it covers the drop from an overhead bar down to deck level, or a mid-length link between fixture clusters, without the bulk of a 20m coil on every position.
Length
15m
Bar to deck drop
Power core
2.5mm²
H05VV-F, 3 core
Signal
110Ω
5-Pin XLR, DMX512
Connectors
Neutrik
powerCON TRUE1-TOP
TRUE1-TOP connectors
Terminated with Neutrik powerCON TRUE1-TOP, the current outdoor-rated generation. TRUE1-TOP mates with TRUE1-TOP; it is not intended to be mixed with the original TRUE1 or the older blue/white powerCON. Check what is fitted to your fixtures before ordering a hybrid run.
Input end
Male connectors, toward the source
5-Pin XLR male
powerCON TRUE1-TOP male
powerCON TRUE1-TOP male
Output end
Female connectors, toward the fixture
5-Pin XLR female
powerCON TRUE1-TOP female
powerCON TRUE1-TOP female
Features
✓
15m length covers overhead bar to deck without excess slack
15m length covers overhead bar to deck without excess slack
✓
Coils smaller than a 20m run for tighter cable trunks
Coils smaller than a 20m run for tighter cable trunks
✓
Made in Britain with Neutrik connectors throughout
Made in Britain with Neutrik connectors throughout
✓
H05VV-F harmonised standard 2.5mm² 3 core power
H05VV-F harmonised standard 2.5mm² 3 core power
✓
Nylon braided signal tail with adhesive lined heatshrink
Nylon braided signal tail with adhesive lined heatshrink
✓
Oxygen-free copper cores for signal integrity
Oxygen-free copper cores for signal integrity
✓
Suits 110Ω balanced data: DMX512, RS422, RS485, timecode
Suits 110Ω balanced data: DMX512, RS422, RS485, timecode
✓
Also carries analogue or AES digital audio alongside power
Also carries analogue or AES digital audio alongside power
✓
Selected fillers hold the jacket round so it coils cleanly
Selected fillers hold the jacket round so it coils cleanly
✓
Clear heatshrink for identification or asset labelling
Clear heatshrink for identification or asset labelling
Specifications
| Stock code | CABL2066 |
| Length | 15m |
| Configuration | 5-Pin XLR male + powerCON TRUE1-TOP male to 5-Pin XLR female + powerCON TRUE1-TOP female |
| Power core | H05VV-F 2.5mm², 3 core |
| Signal impedance | 110Ω balanced |
| Conductors | Oxygen-free copper |
| Connectors | Neutrik |
| Barcode / EAN | 5056742203631 |
| Manufactured | Made in Britain |











