Laserworld BeamBar Series

Bar-format lasers built for beam wall effects, the Laserworld BeamBar range puts ten laser apertures in one housing, each with its own diode and a four-point alignment system reachable from the front of the unit. The single-colour MK3 versions run 900mW of 520nm green, 1200mW of 638nm red or 1300mW of 450nm blue, all Class 3B, while the BeamBar 10RGB carries red, green and blue diodes in every aperture for 2500mW total and full colour mixing. All four run over DMX with each beam individually addressable, the MK3 versions on thirteen channels with master-slave linking, plus stand-alone and sound-to-light modes.

The result reads as a curtain of light, a staple look for club installs and DJ booth backdrops. Haze is essential, since without particles in the air the beams are invisible. Control hardware, ILDA cabling and safety equipment for compliant shows sit in the wider Laser Systems category.

BeamBar FAQs

What is a BeamBar for? Beam walls, ten apertures in one housing, each with its own diode and front-reachable four-point alignment, replacing a row of single lasers with one rig-and-align unit.

Single colour or RGB? The 520 nm green MK3 hits hardest per milliwatt for classic fan looks; RGB versions buy colour at the same format. Safety duties as ever: the guide.