A 1.5m power lead made in Britain from Titanex 2.5mm² 3 core H07RN-F, terminated PCE 16A male plug to Neutrik powerCON TRUE1 TOP. This is the tail length – fixture straight into a socket outlet on the same truss bay, a rack-mounted amp into the distro immediately below, or any position where a 5m lead just leaves you with coils of surplus to dress and tape down.
1.5m
LENGTH · Short tail
16A
SOURCE END · PCE male plug
TRUE1 TOP
FIXTURE END · Neutrik powerCON
2.5mm²
CONDUCTOR · Titanex H07RN-F
TRUE1 TOP compatibilityTRUE1 TOP is Neutrik’s current generation of the powerCON TRUE1 system and is not intermateable with the original TRUE1 connector. Check which generation your fixtures use before ordering – a lot of kit bought before the changeover is still on the earlier version.
Features
1.5m tail for fixture to socket on the same truss bay
No surplus cable to coil, dress or tape down
Manufactured in Britain
Titanex H07RN-F 2.5mm² tough rubber sheathed cable
PCE 16A male plug to Neutrik powerCON TRUE1 TOP
Locking TRUE1 termination will not shake loose in the air
Clear heatshrink for identification or asset label
Titanex sheath stays flexible in cold and outdoor use
240V single phase, standard UK 16A convention
Part of a matched range of lengths for consistent stock
Specifications
| Length | 1.5m |
| Cable | Titanex H07RN-F 2.5mm² 3 core, tough rubber sheathed |
| Connectors | PCE 16A male plug to Neutrik powerCON TRUE1 TOP |
| Rating | 16A, 240V single phase |
| Identification | Clear heatshrink for labelling |
| Stock code | CABL673 |
| Barcode / EAN | 0702338073519 |
| Country of origin | United Kingdom |





