A 5m power lead made in Britain from Titanex 2.5mm² 3 core H07RN-F, terminated PCE 16A male plug to Neutrik powerCON TRUE1 TOP. This is the standard feed cable for TRUE1-inlet fixtures – moving heads, LED wash and beam units, powered speakers – taking them straight off a 16A outlet on a distro or dimmer rack. Five metres is the usual working length for a truss-mounted fixture down to a nearby socket.
5m
LENGTH · Fixture feed
16A
SOURCE END · PCE male plug
TRUE1 TOP
FIXTURE END · Neutrik powerCON
2.5mm²
CONDUCTOR · Titanex H07RN-F
TRUE1 TOP compatibilityTRUE1 TOP is Neutrik’s current generation of the powerCON TRUE1 system and is not intermateable with the original TRUE1 connector. Check which generation your fixtures use before ordering – a lot of kit bought before the changeover is still on the earlier version.
Features
5m working length for truss fixture to local socket
Enough slack for pan and tilt movement on moving heads
Manufactured in Britain
Titanex H07RN-F 2.5mm² tough rubber sheathed cable
PCE 16A male plug to Neutrik powerCON TRUE1 TOP
Locking TRUE1 termination will not shake loose in the air
Clear heatshrink for identification or asset label
Titanex sheath stays flexible in cold and outdoor use
240V single phase, standard UK 16A convention
Part of a matched range of lengths for consistent stock
Specifications
| Length | 5m |
| Cable | Titanex H07RN-F 2.5mm² 3 core, tough rubber sheathed |
| Connectors | PCE 16A male plug to Neutrik powerCON TRUE1 TOP |
| Rating | 16A, 240V single phase |
| Identification | Clear heatshrink for labelling |
| Stock code | CABL676 |
| Barcode / EAN | 0702338073533 |
| Country of origin | United Kingdom |





